Easier AlephX...Can you diy it ?

aht · 14th January 2005, 02:19 AM

I use new value for AlephX schematic and change power supply rail to +/- 12V and use IRFP150N for a poweramp.

It's watts about 30-40 watts single-ended.

If anybody want a pcb design by protel can email to me too.

aht · 14th January 2005, 02:21 AM

Single side but it has ground plane.
For a resonable cost.

aht · 14th January 2005, 02:25 AM

66 Ohms 10W*4 resistor not in PCB because I connect nearest speaker bindingpost for the best result of sound.

Ipanema · 14th January 2005, 03:11 AM

Pls send me a copy of your design pls. Schematic and BOM as well.

Thanks.

aht · 14th January 2005, 04:04 AM

After I design this pcb within G.rollins sch. I can't find IRFP240 & IRFP044 so I change value but I don't change pcb.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wire frames...is there an easier way?	Spasticteapot	Planars & Exotics	7	19th January 2007 02:42 AM
LM741-Is there an easier or better way?	Bose(o)	Solid State	7	21st April 2004 10:56 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th January 2005, 03:11 AM	#4
Ipanema diyAudio Member Join Date: Jun 2004 Location: KL	Pls send me a copy of your design pls. Schematic and BOM as well. Thanks.