X250 Input Voltage

lok · 4th November 2004, 01:54 PM

Maybe this is not the right place to ask this question.

I just want to know if the original PASS X250 110V AC version can convert to a 220V AC version easily?

If yes, how?

Thanks.

Nelson Pass · 4th November 2004, 03:37 PM

There are marked jumpers on the PC board.

The breaker should be changed to 1/2 the value, and this
is probably your biggest issue. You can always put a fuse
of the proper value in series with the AC line.

lok · 4th November 2004, 03:53 PM

Just switch a jumper
and change the fuse value to half the original
Right?

Dear Nelson, you are the most generous nice guy in this world.

4th November 2004, 01:54 PM	#1
lok diyAudio Member Join Date: May 2003 Location: Hong Kong	X250 Input Voltage Maybe this is not the right place to ask this question. I just want to know if the original PASS X250 110V AC version can convert to a 220V AC version easily? If yes, how? Thanks.

4th November 2004, 03:53 PM	#3
lok diyAudio Member Join Date: May 2003 Location: Hong Kong	Thanks Nelson Just switch a jumper and change the fuse value to half the original Right? Dear Nelson, you are the most generous nice guy in this world.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pass X250.5 Voltage Change Confusion	Jazzo	Pass Labs	20	18th June 2009 07:38 PM
Input voltage attenuation	jeffdavison	Tubes / Valves	14	13th September 2008 03:21 AM
Input voltage	lpd	Tubes / Valves	2	11th July 2006 05:49 PM
Input voltage	seahag	Chip Amps	4	30th November 2004 03:34 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th November 2004, 03:37 PM	#2
Nelson Pass The one and only Join Date: Mar 2001	There are marked jumpers on the PC board. The breaker should be changed to 1/2 the value, and this is probably your biggest issue. You can always put a fuse of the proper value in series with the AC line.