Aleph X PCB-files

gogo · 6th October 2004, 06:34 AM

Please, I need the PCB-files (EAGLE format or Gerber) for Aleph X! I wish to make the boards by myself!

Thank you in advance!

gogo · 8th October 2004, 01:08 PM

Thanks to all for the help :-(((

uli · 8th October 2004, 02:52 PM

gogo,

you need not be angry about not getting those files by simply asking for them. As the X-principle is NP´s intellectual AND jurisdictional property, you have to do them your own. It is impolite to stress another ones generosity and kindness too much!

Uli

cocolino · 8th October 2004, 04:25 PM

Hi gogo,

in this thread I linked to two high resolution scans I made from a PCB of the last Aleph-X board group buy:

http://www.diyaudio.com/forums/showt...240#post480240

As You seem to have access to sophisticated PCB CAD software it shouldn`t be a problem to redraw the boards from this scans (maybe there is a way even to convert - maybe DXF? - the scan files into some format which can be imported into and scaled accordingly in Your CAD-program in order to somewhat simplify this task).

You also can find the partslist for this board and also plenty of related information here at DIY-Audio.com.

Hope that helps a little.

gogo · 11th October 2004, 06:51 AM

Thank you cocolino!

Yes, that will help!

6th October 2004, 06:34 AM	#1
gogo diyAudio Member Join Date: Jan 2003 Location: Bulgaria, Sofia	Aleph X PCB-files Please, I need the PCB-files (EAGLE format or Gerber) for Aleph X! I wish to make the boards by myself! Thank you in advance!

8th October 2004, 02:52 PM	#3
uli diyAudio Member Join Date: Dec 2002 Location: Vienna, Austria	gogo, you need not be angry about not getting those files by simply asking for them. As the X-principle is NP´s intellectual AND jurisdictional property, you have to do them your own. It is impolite to stress another ones generosity and kindness too much! Uli __________________ 'Jazz is not dead, it just smells funny' F.Zappa

8th October 2004, 04:25 PM	#4
cocolino diyAudio Member Join Date: May 2002 Location: Bavaria (south of veal sausage equator)	Hi gogo, in this thread I linked to two high resolution scans I made from a PCB of the last Aleph-X board group buy: http://www.diyaudio.com/forums/showt...240#post480240 As You seem to have access to sophisticated PCB CAD software it shouldn`t be a problem to redraw the boards from this scans (maybe there is a way even to convert - maybe DXF? - the scan files into some format which can be imported into and scaled accordingly in Your CAD-program in order to somewhat simplify this task). You also can find the partslist for this board and also plenty of related information here at DIY-Audio.com. Hope that helps a little. __________________ Christoph *STEAL the BEST - INVENT the REST*

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need help with .zma files in FRC	diesel_88	Multi-Way	12	13th October 2008 07:10 AM
Aleph 5 PCB gerber files	vossie	Pass Labs	2	17th March 2003 11:33 AM
Aleph-X Sim Files	Nicwix	Pass Labs	25	29th July 2002 01:13 PM
Gerber files for my Aleph pcb layout	BrianGT	Pass Labs	2	19th April 2002 02:16 PM
Anyone have Aleph board gerber files?	BrianGT	Pass Labs	0	7th April 2002 10:06 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

8th October 2004, 01:08 PM	#2
gogo diyAudio Member Join Date: Jan 2003 Location: Bulgaria, Sofia	Thanks to all for the help :-(((

11th October 2004, 06:51 AM	#5
gogo diyAudio Member Join Date: Jan 2003 Location: Bulgaria, Sofia	Thank you cocolino! Yes, that will help!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read