Aleph 2

Scalar · 21st September 2004, 06:07 PM

Hi,

I want to build the Aleph 2. Here in this Board I found the wiring diagrams that amp, but there
is something strange: the c9 minus and the c10 minus are both connected to out +. In the
known layouts c9 minus is connected to Q5 Emitter. Which option is correct?
Can someone tell me where I can find a fixed wiring diagram?

Best regards,

Scalar

GRollins · 21st September 2004, 08:54 PM

I don't know which 'known layouts' you're referring to, but my layout connected the cap to the emitter. Some of the Alephs used one, some the other. The later models tended towards the emitter connection--the earlier towards the output connection.

Grey

wuffwaff · 22nd September 2004, 10:50 PM

the difference between the two connections is only a few tenths of an Ohm

william

Scalar · 23rd September 2004, 07:48 AM

everything clear,
Thanks for the fast answers

Yours sincerely

Scalar

21st September 2004, 06:07 PM	#1
Scalar diyAudio Member Join Date: Apr 2004 Location: Germany, Muelheim	Aleph 2 Hi, I want to build the Aleph 2. Here in this Board I found the wiring diagrams that amp, but there is something strange: the c9 minus and the c10 minus are both connected to out +. In the known layouts c9 minus is connected to Q5 Emitter. Which option is correct? Can someone tell me where I can find a fixed wiring diagram? Best regards, Scalar

22nd September 2004, 10:50 PM	#3
wuffwaff diyAudio Member Join Date: Aug 2001 Location: Ingolstadt Germany	the difference between the two connections is only a few tenths of an Ohm william __________________ een ooievaar is geen konijn want zijn oren zijn te klein!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First version Aleph 0 (Null, ZERO, O, Os, 0s) versus later Aleph versions	tiefbassuebertr	Pass Labs	13	27th April 2012 02:13 AM
Aleph (Single Ended) + Larvadin (no Memory Distortion) = Ultimate Aleph?	tiefbassuebertr	Pass Labs	17	9th January 2012 02:10 PM
Mini Aleph Board & Aleph 2 Parts List	gpsmithii	Pass Labs	3	16th January 2010 03:58 AM
First version Aleph 0 (Null, ZERO, O, Os, 0s) versus later Aleph versions	tiefbassuebertr	Pass Labs	0	6th August 2009 11:11 AM
PCBs for Aleph 2, Aleph 3, Aleph 4 and Aleph 5 amplifiers	kristijan-k	Swap Meet	64	12th September 2002 07:55 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st September 2004, 08:54 PM	#2
GRollins diyAudio Member Join Date: Feb 2001 Location: Columbia, SC	I don't know which 'known layouts' you're referring to, but my layout connected the cap to the emitter. Some of the Alephs used one, some the other. The later models tended towards the emitter connection--the earlier towards the output connection. Grey

23rd September 2004, 07:48 AM	#4
Scalar diyAudio Member Join Date: Apr 2004 Location: Germany, Muelheim	everything clear, Thanks for the fast answers Yours sincerely Scalar

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)