Aleph-X : could you validate ?

GlouBou · 29th August 2004, 09:22 AM

Hello There,

We a are working on cards for our Aleph-X.

Here they are. Could you validate this ?

and

Thanks a lot.

GlouBou

GlouBou · 30th August 2004, 12:08 PM

Hello there,

It seem's tha you don't like my topic

So, i would like you, all experts, say to me if there is some big mistakes on our concept or if you have some remarks.
This should be very nice from you to help us

@+ GlouBou

PS : excuse my very poor english

piotrzurawski · 30th August 2004, 05:52 PM

Well , assuming that the view is on component layer, it looks good for me. However please understand that asking here is 2+2 = 4 could be seen by the majority of this board members a little boring thread. Anyway, you need two of those boards to make a single chanel Aleph-X (8 IRF's per channel), wish you enjoying with the good sound of this amp

Piotr

GlouBou · 30th August 2004, 07:44 PM

Hello,

A lot of thank you for answering my question !!!

Even if this is a boring question

Kind regards,

@+ GlouBou

29th August 2004, 09:22 AM	#1
GlouBou diyAudio Member Join Date: May 2004 Location: Neuilly-en-Thelle - Oise - France	Aleph-X : could you validate ? Hello There, We a are working on cards for our Aleph-X. Here they are. Could you validate this ? and Thanks a lot. GlouBou __________________ Le pou !

30th August 2004, 12:08 PM	#2
GlouBou diyAudio Member Join Date: May 2004 Location: Neuilly-en-Thelle - Oise - France	Hello there, It seem's tha you don't like my topic So, i would like you, all experts, say to me if there is some big mistakes on our concept or if you have some remarks. This should be very nice from you to help us @+ GlouBou PS : excuse my very poor english __________________ Le pou !

30th August 2004, 07:44 PM	#4
GlouBou diyAudio Member Join Date: May 2004 Location: Neuilly-en-Thelle - Oise - France	Hello, A lot of thank you for answering my question !!! Even if this is a boring question Kind regards, @+ GlouBou __________________ Le pou !

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First version Aleph 0 (Null, ZERO, O, Os, 0s) versus later Aleph versions	tiefbassuebertr	Pass Labs	13	27th April 2012 02:13 AM
Aleph (Single Ended) + Larvadin (no Memory Distortion) = Ultimate Aleph?	tiefbassuebertr	Pass Labs	17	9th January 2012 02:10 PM
First version Aleph 0 (Null, ZERO, O, Os, 0s) versus later Aleph versions	tiefbassuebertr	Pass Labs	0	6th August 2009 11:11 AM
PCBs for Aleph 2, Aleph 3, Aleph 4 and Aleph 5 amplifiers	kristijan-k	Swap Meet	64	12th September 2002 07:55 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th August 2004, 05:52 PM	#3
piotrzurawski diyAudio Member Join Date: Jul 2004 Location: Gdynia,Poland	Well , assuming that the view is on component layer, it looks good for me. However please understand that asking here is 2+2 = 4 could be seen by the majority of this board members a little boring thread. Anyway, you need two of those boards to make a single chanel Aleph-X (8 IRF's per channel), wish you enjoying with the good sound of this amp Piotr

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read