Hi,
Is it save to use some Black gate FK 220uF/25 v capicitors in my Alpeh5 instead of 220uF/50V??
They are smaller than the std black gates (12.5 mm versus 15 mm wide), so fit better on the KK pcb
I also happen to have a pair of Elna cerafine 220uF/25 v laying around. Can I use these at the input?
Is it save to use some Black gate FK 220uF/25 v capicitors in my Alpeh5 instead of 220uF/50V??
They are smaller than the std black gates (12.5 mm versus 15 mm wide), so fit better on the KK pcb
I also happen to have a pair of Elna cerafine 220uF/25 v laying around. Can I use these at the input?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Pass Labs
- 220uf/25 volt save to use in Aleph5?