Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Pass Labs This forum is dedicated to Pass Labs discussion.

Rectifier design question
Rectifier design question
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 29th June 2004, 10:54 AM   #1
Svetlana is offline Svetlana  New Zealand
diyAudio Member
 
Join Date: Oct 2003
Location: Christchurch
Question Rectifier design question

Whatís the best rectifier design (for a +/- supply) to go for when using a center taped transformer?

I thought I saw Nelson post one, but I canít seem to find it.
  Reply With Quote
Old 29th June 2004, 04:11 PM   #2
Alain Dupont is offline Alain Dupont  France
diyAudio Member
 
Alain Dupont's Avatar
 
Join Date: Sep 2003
Location: Paris - France
Svetlana,

>> Whatís the best rectifier design (for a +/- supply) to go for when using
>> a center taped transformer?

2 rectifier bridges, take a look at the A75 part2.pdf

The center tap gives a easy ground, and symetrical windings gives
equal voltage out of the bridges, + 4 diodes bridges better load to the transfo.

Alain.
  Reply With Quote

Reply


Rectifier design questionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Vacuum Rectifier Question Eli Duttman Tubes / Valves 16 4th January 2008 12:52 AM
Rectifier question ifeliciano Power Supplies 4 24th September 2006 09:26 PM
Bridge Rectifier question hotscot Power Supplies 14 15th January 2006 05:15 PM
a quick rectifier question demogorgon Parts 3 30th January 2005 08:44 PM
rectifier tube question jtsjf Tubes / Valves 3 11th April 2004 08:03 PM


New To Site? Need Help?

All times are GMT. The time now is 02:35 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki