Aleph 5--CRC network

billy · 24th June 2004, 02:57 AM

Hello, if I want to make a CRC network on Aleph 5, I have some idea, 60,000uf --R-- 60,000uf , so total 120,000uf for one channel.

Would you tell me the value of the "R" I choose?

Nelson Pass · 24th June 2004, 04:13 AM

The amp needs to idle at about 2 amps per channel, and if you
figure that a 1 volt loss is OK, then you are looking at .47 ohms.

However it will be running at 2 watts, so it's probably better to
parallel 2 x 1 ohm resistors at 3 watts each. This should work
just Jake, as we say in Foresthill.

billy · 24th June 2004, 02:57 PM

Thank you , Mr.Pass!! I love you !!

24th June 2004, 02:57 AM	#1
billy diyAudio Member Join Date: Dec 2001 Location: Hong Kong	Aleph 5--CRC network Hello, if I want to make a CRC network on Aleph 5, I have some idea, 60,000uf --R-- 60,000uf , so total 120,000uf for one channel. Would you tell me the value of the "R" I choose?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
advise on 2/3 way network	kdlsrinu	Multi-Way	8	24th August 2005 07:53 AM
Zobel Network	nuttinbutSQ	Multi-Way	6	16th March 2004 08:19 AM
Network Analyzer	hugeli60	Solid State	4	15th March 2002 03:00 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th June 2004, 04:13 AM	#2
Nelson Pass The one and only Join Date: Mar 2001	The amp needs to idle at about 2 amps per channel, and if you figure that a 1 volt loss is OK, then you are looking at .47 ohms. However it will be running at 2 watts, so it's probably better to parallel 2 x 1 ohm resistors at 3 watts each. This should work just Jake, as we say in Foresthill.

24th June 2004, 02:57 PM	#3
billy diyAudio Member Join Date: Dec 2001 Location: Hong Kong	Thank you , Mr.Pass!! I love you !!