miracles with Zen V4

elviukai · 10th June 2004, 09:34 PM

frankly speaking I dont like always search for help but last week was very intresting- burn about 34 irfp 044/240/054 fets..

what is wrong with one chanel, I even ghange all parts except film caps, but afters power on, and open bias voltmeter from rezistor R0 reads about 0,45-0,67 it variuos itself,and after 5-7 seconds and then down to o,oo..

result- mosfets dead, no other parts show any failure( resistors has normal values, caps charging/discarging, zenner diodes show normal values, diode also, there is no shor circuit between fet legs, between pcb track( I think final that pcb failute) after failure at all mosfets come 45 voltage almost at all legs, even at ztx 450

what can be problem there?

any caps film cap dead? rezistors after beeing active changes values?

I have no theory- all posible checked(not 100%, because 5 days working 6-9 hours with this amp make me tired

)

ANY sugestion welcome..

SGregory · 10th June 2004, 10:32 PM

Get some sleep. Take two days off, and recheck everything. Then check the polarity of the current sense transiters. Don't have the part number in front of me. I had similar problem.
Scott

10th June 2004, 09:34 PM	#1
elviukai diyAudio Member Join Date: Apr 2003 Location: EU- Electronic Union country	miracles with Zen V4 frankly speaking I dont like always search for help but last week was very intresting- burn about 34 irfp 044/240/054 fets.. what is wrong with one chanel, I even ghange all parts except film caps, but afters power on, and open bias voltmeter from rezistor R0 reads about 0,45-0,67 it variuos itself,and after 5-7 seconds and then down to o,oo.. result- mosfets dead, no other parts show any failure( resistors has normal values, caps charging/discarging, zenner diodes show normal values, diode also, there is no shor circuit between fet legs, between pcb track( I think final that pcb failute) after failure at all mosfets come 45 voltage almost at all legs, even at ztx 450 what can be problem there? any caps film cap dead? rezistors after beeing active changes values? I have no theory- all posible checked(not 100%, because 5 days working 6-9 hours with this amp make me tired ) ANY sugestion welcome.. __________________ natural sound reproduction from traditional dynamic drivers?!! come on.. no no, it can be.. it must be!..

10th June 2004, 10:32 PM	#2
SGregory Tubie Noobie diyAudio Member Join Date: Apr 2003 Location: Southern Tier NY	Get some sleep. Take two days off, and recheck everything. Then check the polarity of the current sense transiters. Don't have the part number in front of me. I had similar problem. Scott __________________ Living Life Doing the Waltz in 4/4 meter.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)