Zen power supply - acceptable?

jh6you · 3rd June 2004, 06:12 AM

Is this acceptable for Zen amps?

altor · 3rd June 2004, 06:21 AM

Yes, why not ?

kilowattski · 3rd June 2004, 01:02 PM

This will isolate chassis ground from your circuit ground to prevent hum and still be safe. Nelson uses this in the Zen V4 power supply.

jh6you · 3rd June 2004, 03:35 PM

I can't see your attachment.
I don't know why.

kilowattski · 3rd June 2004, 03:44 PM

I don't know why? I can see it on my side.

kilowattski · 3rd June 2004, 04:06 PM

I don't know why? I can see it on my side.

jh6you · 4th June 2004, 07:34 AM

Thanks for your responses.

The diagram of post#1 shows that each transformer has dual secondary. I am aiming at using one part for power supply, meanwhile, the other part as a choke for a better regulation result.

Is it well worth considering?

3rd June 2004, 06:21 AM	#2
altor diyAudio Member Join Date: Oct 2003 Location: Europe-Asia	Yes, why not ? __________________ Regards, Alex

3rd June 2004, 01:02 PM	#3
kilowattski diyAudio Member Join Date: Aug 2003 Location: Long Island, New York	This will isolate chassis ground from your circuit ground to prevent hum and still be safe. Nelson uses this in the Zen V4 power supply. __________________ ----------------------------------------------- Kilowattski

3rd June 2004, 03:44 PM	#5
kilowattski diyAudio Member Join Date: Aug 2003 Location: Long Island, New York	I don't know why? I can see it on my side. __________________ ----------------------------------------------- Kilowattski

3rd June 2004, 04:06 PM	#6
kilowattski diyAudio Member Join Date: Aug 2003 Location: Long Island, New York	I don't know why? I can see it on my side. __________________ ----------------------------------------------- Kilowattski

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th June 2004, 07:34 AM	#7
jh6you Account Disabled Join Date: Aug 2002 Location: Near to the Pacific Ocean	Thanks for your responses. The diagram of post#1 shows that each transformer has dual secondary. I am aiming at using one part for power supply, meanwhile, the other part as a choke for a better regulation result. Is it well worth considering?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Acceptable F3	UNDERSTANDIN	Multi-Way	0	21st September 2005 03:23 PM
What MDF thickness is acceptable?	mr_push_pull	Multi-Way	24	15th September 2004 04:49 PM
heater supply (xformer specs are 6.3V 2.5A) as supply for a power LED?	jarthel	Tubes / Valves	10	21st July 2003 01:30 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read