diyAudio

diyAudio (http://www.diyaudio.com/forums/index.php)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   zen ver 4 1000va dual 65v secondary question (http://www.diyaudio.com/forums/pass-labs/35154-zen-ver-4-1000va-dual-65v-secondary-question.html)

jeanchin2003 1st June 2004 06:38 AM

zen ver 4 1000va dual 65v secondary question
 
Has anyone tried to use a toroid with secondaries higher then the required 18v secondaries for a Zen Amp. I have a 1000va toroid with two 65V secondary I was thinking about using. It makes 92vdc after the rectifier. How can I lower the voltage?

Nelson Pass 1st June 2004 04:05 PM

2 ways.

If it has dual 120V primaries, you can put them in series and
run them at 120V.

(or)

You can place a choke in series with the AC primary(s) or AC
secondaries to drop the voltage.


All times are GMT. The time now is 03:07 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio

Wiki