diyAudio (
-   Pass Labs (
-   -   not giving up on the SOZ (

MEGA_amp 19th May 2004 03:25 PM

not giving up on the SOZ
2 Attachment(s)
I recently purchased rather large heatsinks from CTR surplus, I have 2 measured at 21" x 15" 1/2" base 3" high fins. They are massive and very heavy, they were used to cool a 9kVA unit from a company called Analogic Corporation. With my Aleph 2 on hold, i wanted to give a hack at the SOZ again. I also purchased surplus some Dale Aluminum power resistors: 6 50W 1 ohm, and will be purchasing 8 Dale 250 watters. I'm aiming at 25-30 watts out. This is the power supply for one channel I plan to use, just checking to see if its correct. Particularly the xformer config.

Many Thanks,


Alain Dupont 19th May 2004 05:16 PM


You transformer wiring seams correct. ;)



moe29 19th May 2004 06:24 PM

Be sure to use some type of inrush current protection... you've
got a lot of uF's in the PSU :devilr:

Nelson Pass 19th May 2004 07:33 PM

MuuuHahahahaha :redhot:

All times are GMT. The time now is 10:38 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2