|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Pass Labs This forum is dedicated to Pass Labs discussion. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
19th May 2004, 03:12 AM
|
#1 |
|
diyAudio Member
Join Date: Dec 2001
Location: Hong Kong
|
Aleph 5 resister ??
Hello, can I put "1ohm/3W" resister in R64-66 . R40-42 & "0.47ohm/3W" in R22-25 ?
I know that many diyer is using "5W" resister on it, but I cannot find a good one of "5W" in my location. Thank you!! |
|
|
19th May 2004, 04:42 AM
|
#2 |
|
Account Disabled
Join Date: Aug 2002
Location: Near to the Pacific Ocean
|
I approximate that maximum continuous amperes flowing through each register you mentioned would be around 1A. It means that W=1x1x1=1. So, I think that @3W is more than enough even if my approximation is rough. For example, I use max. @3W registers for my similar amps. I find no problem at all.
Good luck. JH |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Aleph (Single Ended) + Larvadin (no Memory Distortion) = Ultimate Aleph? | tiefbassuebertr | Pass Labs | 17 | 9th January 2012 02:10 PM |
| About INPUT RESISTER separated from ground | turnA_zpoint | Solid State | 8 | 24th June 2010 01:36 PM |
| Low value IV resister followed with high gain amp stage?[tda1543] | setmenu | Digital Source | 10 | 27th September 2004 01:14 PM |
| Where can i get more of these resister's.. | jleaman | Parts | 11 | 4th July 2003 04:25 PM |
| PCBs for Aleph 2, Aleph 3, Aleph 4 and Aleph 5 amplifiers | kristijan-k | Swap Meet | 64 | 12th September 2002 07:55 AM |
| New To Site? | Need Help? |
