Hello, can I put "1ohm/3W" resister in R64-66 . R40-42 & "0.47ohm/3W" in R22-25 ?
I know that many diyer is using "5W" resister on it, but I cannot find a good one of "5W" in my location.
Thank you!!
I know that many diyer is using "5W" resister on it, but I cannot find a good one of "5W" in my location.
Thank you!!
I approximate that maximum continuous amperes flowing through each register you mentioned would be around 1A. It means that W=1x1x1=1. So, I think that @3W is more than enough even if my approximation is rough. For example, I use max. @3W registers for my similar amps. I find no problem at all.
Good luck.
JH
Good luck.
JH
- Status
- Not open for further replies.