Hi,
I read alot about changing the bias in the Alephs. I don't uderstand one pretty stupid thing. What does "50%-50% ac current gain means" or "50% costant current source gain"? 50% of what? How and where do I measure it? I know it's pretty stupid question for somebody but please enlighten me.
I read alot about changing the bias in the Alephs. I don't uderstand one pretty stupid thing. What does "50%-50% ac current gain means" or "50% costant current source gain"? 50% of what? How and where do I measure it? I know it's pretty stupid question for somebody but please enlighten me.
A simple description of adjusting the aleph current source is in the Zen V2 article at http://www.passdiy.com/projects/zenv2-1.htm
For the Zen amp, this means that the AC current through the resistor attached to the drain of the CCS MOSFET is 1/2 of the AC current delivered throught the output resistors.
Metalman
For the Zen amp, this means that the AC current through the resistor attached to the drain of the CCS MOSFET is 1/2 of the AC current delivered throught the output resistors.
Metalman
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.