Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Pass Labs This forum is dedicated to Pass Labs discussion.

Aleph P 1.7 Single Ended Input Question
Aleph P 1.7 Single Ended Input Question
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th April 2004, 02:39 AM   #1
kilowattski is offline kilowattski  United States
diyAudio Member
 
kilowattski's Avatar
 
Join Date: Aug 2003
Location: Long Island, New York
Question Aleph P 1.7 Single Ended Input Question

I did a search and could not find the answer to this question so I apologize if I have missed it. I think the answer to this question is to ground the (-) input but I figured I would ask the experts. Most of my sources are single ended outputs. Can I set the input of the Aleph P 1.7 to single ended operation by grounding the (-) input? Secondly, do the transistors need more heatsinking than the standard TO-220 PCB heatsinks? Thanks for your help gents.

Arrggghhh Matey, only 144 days left till Talk Like a Pirate Day!
__________________
-----------------------------------------------
Kilowattski
  Reply With Quote
Old 28th April 2004, 06:06 AM   #2
Klaus is offline Klaus  Germany
diyAudio Member
 
Join Date: May 2002
Location: near Frankfurt/Main
Hi,

The upper CCS FET sees 62 27 = 35V at max. 30mA = 1.05W. Herefor I use a small heat sink, a stick o type for lowest thermal capacity = warm up time.
The middle signal FET lays between 27 and 9V at 20mA, so 0.36W a cool number w/o any measure.
The lower CCS FET handles 9V to 0V at 20mA, so just forget it.

In my Aleph P1.7 I short with the ELMA input switch the negative input to ground for unsymmetrical inputs. Maybe it is not required additionally, because the input resistor as well pulls the input branch down, but I wanted to pull down with almost zero resistance.

The capability of the P1.7 to do a almost perfect symmetrical conversion is IMHO one of its best things. So the (to my ears) strong advantages of driving the power amps symmetrically can be used for any source. Pre amps w/o CCSs can never perform so good.

Regards

Klaus
  Reply With Quote

Reply


Aleph P 1.7 Single Ended Input QuestionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Aleph (Single Ended) + Larvadin (no Memory Distortion) = Ultimate Aleph? tiefbassuebertr Pass Labs 20 7th April 2018 11:04 AM
Single ended KT88 question overdrajv Tubes / Valves 8 22nd December 2008 10:44 AM
Single-ended input to balanced output, no DC offset LineSource Solid State 16 19th October 2005 09:32 PM
aleph p1.7 - help on single ended use pamaz Pass Labs 2 6th October 2004 09:54 PM
BoSoZ: Single-ended use question eLarson Pass Labs 3 29th August 2002 03:52 AM


New To Site? Need Help?

All times are GMT. The time now is 08:42 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki