Aleph ONO Phono Revoltage

lubesson · 15th April 2004, 02:50 AM

Hi, I have Aleph ONO Phono and want to revoltage to 220V by myself. Is it very complicated to DIY for revoltage? Please kindly help.

analog_sa · 15th April 2004, 08:04 AM

Looking at the circuit it doesn't seem difficult at all. The two primaries on the transformer need to be connected in series and that's all.

lubesson · 15th April 2004, 08:21 AM

analog_sa:
Thanks alot . Is it like the picture shown below (This is XONO ). What else should I pay attention?

analog_sa · 15th April 2004, 11:43 AM

You seem to be fully set then. Pay attention? Try not to burn your fingers soldering

Good luck

Karen · 15th April 2004, 03:43 PM

Remove the white wire on the left, replace the top white wire with one extended from orange to brown diagonally. Then don't forget to change your fuse to 1/4 amp!

P.S. That is an Xono power supply board.....

lubesson · 16th April 2004, 12:56 AM

analog_sa: Thanks for being so concern. The XONO picture is not mine. I found it from the web. My one is Aleph ONO.

Karen: Thanks for your explaination. I'll post pix here once I'd done it. Thanks!

15th April 2004, 02:50 AM	#1
lubesson diyAudio Member Join Date: Apr 2004 Location: Hong Kong	Aleph ONO Phono Revoltage Hi, I have Aleph ONO Phono and want to revoltage to 220V by myself. Is it very complicated to DIY for revoltage? Please kindly help.

15th April 2004, 03:43 PM	#5
Karen diyAudio Member Join Date: Sep 2001 Location: Foresthill, CA	Remove the white wire on the left, replace the top white wire with one extended from orange to brown diagonally. Then don't forget to change your fuse to 1/4 amp! P.S. That is an Xono power supply board..... __________________ ..K

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What phono stage for aleph p1.7	freakyone	Pass Labs	13	1st March 2009 05:22 PM
My new Aleph ONO Phono Section	Algar_emi	Pass Labs	115	28th October 2008 11:33 AM
Comparison of Aleph Ono and Pearl phono preamps?	Justinasia	Analog Line Level	4	30th November 2006 07:56 AM
Call for Aleph ONO phono stage purchase	coffin	Analogue Source	1	17th January 2003 03:41 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

15th April 2004, 08:04 AM	#2
analog_sa diyAudio Member Join Date: Aug 2002 Location: Sofia	Looking at the circuit it doesn't seem difficult at all. The two primaries on the transformer need to be connected in series and that's all.

15th April 2004, 11:43 AM	#4
analog_sa diyAudio Member Join Date: Aug 2002 Location: Sofia	You seem to be fully set then. Pay attention? Try not to burn your fingers soldering Good luck

16th April 2004, 12:56 AM	#6
lubesson diyAudio Member Join Date: Apr 2004 Location: Hong Kong	analog_sa: Thanks for being so concern. The XONO picture is not mine. I found it from the web. My one is Aleph ONO. Karen: Thanks for your explaination. I'll post pix here once I'd done it. Thanks!