diyAudio (
-   Pass Labs (
-   -   Best choice for in/out caps Aleph p 1.7 (

bbakota2000 26th March 2004 10:11 PM

Best choice for in/out caps Aleph p 1.7
Please help me, last two weeks I spend looking for good quality capacitors for input and output (10uf) in P 1.7. I'm completely confused. Is it good to use high voltage ones? Please suggest a brand or anything that will provide me with most transparent sounding caps.

uli 27th March 2004 07:52 AM

best value in Europe


:nod: :nod: :nod:

Alain Dupont 27th March 2004 02:29 PM

2 Attachment(s)

You can find:
Metallized Polypropylene Film Capacitor made in France
from: 0.01 ... 330 µF, E 24 series, ±5 %, ±2 %.

like these at:

For input caps...;)

Panelhead 27th March 2004 02:56 PM

Coupling Caps
To my ears, once the values go over 2 - 3 ufd the best coupling caps are Black Gate NX. The 10 ufd plastic caps have always sounded a lttle rubbery in my systems.


yoke 27th March 2004 03:09 PM

Hi bbakota...
I do remember that people post that they have best results with BG...

yoke 27th March 2004 03:11 PM

Black Gate NX...

till 27th March 2004 03:32 PM


trigon 27th March 2004 04:09 PM

Yes - WIMA MKP10


Asen 27th March 2004 04:51 PM

What about VISATON 10uF MKP 250V? I have 16 pcs of them but haven’t tried them yet. What I see as a drawback - they're rather big.

till 27th March 2004 04:55 PM


they're rather big.
What do you think is the size of Wima MKPs? (i would not wonder if they are from the same manufacturing line)

I use wima MKS, have no problems, and they are smaller than MKP but still not really small. But much less expensive.

All times are GMT. The time now is 08:01 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio