Nak statis

[Duck-Twacy]

Did they pay the royalties ?

Anyway nice amp
http://www.springair.org/d_19790_Nak...A_5_E45632.htm

Although...
http://www.springair.org/d_19815_Thr..._SA_245639.htm

[reverber]

IIRC, Nelson himself stated somewhere here that they paid quite handsomely, which probably makes him more able to be generous in sharing his IP with us.

Cody

[altor]

What Nelson's designes were used in these 2x150w and 2x200w
Clfss-A amplifiers?

It seems to me, that for the "pure class A" - both of these amps are too small, at least - the first (Nakamichi), am I right ?

[roddyama]

Originally posted by altor
What Nelson's designes were used in these 2x150w and 2x200w
Clfss-A amplifiers?

It seems to me, that for the "pure class A" - both of these amps are too small, at least - the first (Nakamichi), am I right ?

Both of the amps had a reputation for running hot, but not for failure.

Nak also used Nelsons design in a couple of receiver amps.

[Duck-Twacy]

I vaguely remember a Nak receiver. very stylish

Maybe it was this one

[altor]

Originally posted by roddyama

Both of the amps had a reputation for running hot, but not for failure.

Yea, but according to the size of the heatsink - I can't imagine that they are possible to dissipate (2x150)x3=~1kW.....

[roddyama]

Originally posted by altor


Yea, but according to the size of the heatsink - I can't imagine that they are possible to dissipate (2x150)x3=~1kW.....

Maybe not what you might call over kill, but enough to keep the amp alive.

[altor]

Originally posted by roddyama

Maybe not what you might call over kill, but enough to keep the amp alive.

Ohhhh! I bag Yor pardon!!!!

This is absolutly another view then at the German site - on this photo is clear the height of the amplifier.
On German's photo - it is much lower, and that why I ask a question.

[Duck-Twacy]

Roddyama's is the PA-70. Its looking a bit more serious imo

http://page.freett.com/knisi/pa-70.htm

[moe29]

that PA-70 is a cool looking amp!