Timeframe for Aleph boards from Pass Labs?

Apogee · 10th April 2002, 12:00 AM

Prior to me adding my name to the group of folks doing the bulk purchase of Aleph 4 boards, I was wondering if Pass Labs is going to be offering boards in the near-term?

Not to dissuade anyone from the bulk order, but I would much rather support Pass if at all possible...

Any info would be great!

Thanks,

Steve

AudioFreak · 10th April 2002, 12:12 AM

It is unlikely that www.passdiy.com will be offering Aleph boards (at all and certainly not in the near future) so if your interested, go with the current bulk purchase.

Quote:

Quote from www.passdiy.com

Can I order PCBs for older projects?

The short answer - NO. The long answer is still probably not, we will provide circuit boards only if we go back and revise these projects.

FBJ · 10th April 2002, 12:34 AM

I took the meaning that passdiy would not offer PCBs of the older projects that appeared in TAA/audio electronics/audio Xpess. They would only offer new boards if some kind of revision (that if someone at passdiy would have time) to what is sold at the aX web site.

Nelson Pass · 10th April 2002, 12:58 AM

We will eventually get around to offering something,
but if you have an opportunity to get something now,
go ahead. The layout of the Aleph is pretty uncritical,
and I doubt that a layout from me personally would
bring much more to the table.

More likely, a usable Aleph front end will result from
the ongoing Zen Variations. The Penultimate Zen will
have a board in part 4, and passdiy will make that
available.

AudioFreak · 10th April 2002, 01:46 AM

Ok, great thanks Nelson.

Apogee · 10th April 2002, 02:44 AM

Thanks Nelson et. all for the replies....

I'll add my name to the list...

Steve

BrianGT · 10th April 2002, 05:13 AM

Make sure if you want one the list that you e-mail me at gte619j@prism.gatech.edu with the subject "Aleph pcb boards"

and please include your contact information.

I am working on the gerber layout now. Please look at my preliminary pcb layout at the end of the thread.

If all goes well, I will finalize the order by the beginning of next week and get the pricing decided on the number of people who want the board.

If all goes well, we should have boards in a 2 - 3 weeks.

--
Brian

10th April 2002, 12:00 AM	#1
Apogee diyAudio Member Join Date: Feb 2002 Location: Tacoma, WA	Timeframe for Aleph boards from Pass Labs? Prior to me adding my name to the group of folks doing the bulk purchase of Aleph 4 boards, I was wondering if Pass Labs is going to be offering boards in the near-term? Not to dissuade anyone from the bulk order, but I would much rather support Pass if at all possible... Any info would be great! Thanks, Steve

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pass Aleph 1.7 boards, Zhaolu 2.5A, P700 VRDS, UGS PS boards, dac chips	analog_sa	Swap Meet	4	14th March 2009 06:29 PM
Pass Labs / Nelson - Regarding F1 Boards	suds	Group Buys	0	30th October 2008 08:05 AM
WTB Pass labs First Wat (F5/F4) pcb boards	elviukai	Swap Meet	0	25th August 2008 09:45 PM
FS - Pass Labs Pearl boards	Mark777	Swap Meet	6	4th December 2006 02:51 PM
DIY Pass Labs Aleph Ono	arnach	Pass Labs	21	29th April 2002 11:34 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th April 2002, 12:34 AM	#3
FBJ diyAudio Member Join Date: Mar 2002 Location: USA	I took the meaning that passdiy would not offer PCBs of the older projects that appeared in TAA/audio electronics/audio Xpess. They would only offer new boards if some kind of revision (that if someone at passdiy would have time) to what is sold at the aX web site.

10th April 2002, 12:58 AM	#4
Nelson Pass The one and only Join Date: Mar 2001	We will eventually get around to offering something, but if you have an opportunity to get something now, go ahead. The layout of the Aleph is pretty uncritical, and I doubt that a layout from me personally would bring much more to the table. More likely, a usable Aleph front end will result from the ongoing Zen Variations. The Penultimate Zen will have a board in part 4, and passdiy will make that available.

10th April 2002, 01:46 AM	#5
AudioFreak Warp Engineer On Holiday Join Date: Oct 2001 Location: Queensland, Australia	Ok, great thanks Nelson.

10th April 2002, 02:44 AM	#6
Apogee diyAudio Member Join Date: Feb 2002 Location: Tacoma, WA	Thanks Nelson et. all for the replies.... I'll add my name to the list... Steve

10th April 2002, 05:13 AM	#7
BrianGT diyAudio Moderator Emeritus Join Date: Jan 2002 Location: near Atlanta, GA	Make sure if you want one the list that you e-mail me at gte619j@prism.gatech.edu with the subject "Aleph pcb boards" and please include your contact information. I am working on the gerber layout now. Please look at my preliminary pcb layout at the end of the thread. If all goes well, I will finalize the order by the beginning of next week and get the pricing decided on the number of people who want the board. If all goes well, we should have boards in a 2 - 3 weeks. -- Brian