unknown PCB

wijgers · 12th March 2004, 03:49 PM

Does some one recognize attached PCB???

I think it's is an Aleph 30 clone, but couldn't find it anywhere in this forum. I hope I can find the Silkmaask of it, so I can see if I have made my own PCB correct.

If some one find his own PCB back here, would he/she be so kind to send me the mask file or post it in this thread.

Thanks in Advance,

Nils

uli · 12th March 2004, 04:16 PM

I think it looks like one of Kristian´s (Croatia) designs

Uli

Holger Barske · 12th March 2004, 04:39 PM

No, it isn't from Kristijan.
Have a look at this Thread.

uli · 12th March 2004, 05:26 PM

you are right

Uli

wijgers · 13th March 2004, 08:05 PM

Thanks fot the post. Now I can check the rest tanks you all

Nils

OliverD · 14th March 2004, 08:24 AM

This is one of my Aleph-5 clone PCBs. There are better designs around here

It was designed around a forced airflow heatsink which dictated some compromises. If you use it, cut the ground traces to separate PSU bypassing and signal grounds.

12th March 2004, 04:16 PM	#2
uli diyAudio Member Join Date: Dec 2002 Location: Vienna, Austria	kristian I think it looks like one of Kristian´s (Croatia) designs Uli __________________ 'Jazz is not dead, it just smells funny' F.Zappa

12th March 2004, 04:39 PM	#3
Holger Barske diyAudio Member Join Date: Jan 2001 Location: Ruhrgebiet	No, it isn't from Kristijan. Have a look at this Thread. __________________ Best regards: Holger www.holgerbarske.com

12th March 2004, 05:26 PM	#4
uli diyAudio Member Join Date: Dec 2002 Location: Vienna, Austria	oops you are right Uli __________________ 'Jazz is not dead, it just smells funny' F.Zappa

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unknown turntable	Cassiel	Analogue Source	1	11th March 2009 06:28 PM
unknown arm	peterr	Analogue Source	6	13th February 2006 12:46 PM
Unknown SMD	Netlist	Parts	3	30th December 2005 12:02 PM
Unknown origin box	Ciu	Full Range	0	30th December 2005 03:07 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th March 2004, 08:05 PM	#5
wijgers diyAudio Member Join Date: Aug 2003 Location: Near Rotterdam	Thanks fot the post. Now I can check the rest tanks you all Nils

14th March 2004, 08:24 AM	#6
OliverD diyAudio Member Join Date: Nov 2002 Location: Germany	This is one of my Aleph-5 clone PCBs. There are better designs around here It was designed around a forced airflow heatsink which dictated some compromises. If you use it, cut the ground traces to separate PSU bypassing and signal grounds.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read