IRF510 or IRF610 in bosoz?

tobias_svensk · 9th February 2004, 05:43 PM

Hello, I just wanna ask wich one of these you guys prefer, in terms of sound quality. If there is a difference... thinking about Rds on them if that maybe could make a difference.

Thanks

Praudio · 9th February 2004, 08:38 PM

Transfo, wiring,diodes,capa,solder,volume will do much more on sound quality than the choice of 510/610 .

tobias_svensk · 9th February 2004, 09:18 PM

Thanks for your answer.

Speaking off diodes.. the 1N4005 for rectifing, there must be something better than that. I have some OnSemi TO220 diodes.
MURH860CT
MSR860

I was thinking off maybe using the MURH´s

Cheers

Nelson Pass · 9th February 2004, 09:28 PM

510 is slightly better in this use.

Mad_K · 9th February 2004, 09:37 PM

Quote:

Originally posted by tobias_svensk
Hello, I just wanna ask wich one of these you guys prefer, in terms of sound quality. If there is a difference... thinking about Rds on them if that maybe could make a difference.

Thanks

It's the Gfs and Ciss that makes the biggest difference. I think the 510 sounds a little darker, more mature, "macho". I also enjoy the 610 very much. Try both and you'll find your preference

Quote:

Originally posted by Praudio
Transfo, wiring,diodes,capa,solder,volume will do much more on sound quality than the choice of 510/610 .

Don't think so. These choices are likely to be the same anyways.

tobias_svensk · 9th February 2004, 10:58 PM

Thanks for your answers Nelson and Mad_K !

When I saw that Mr. Pass had answered my post I looked like a combination of this ->

(never heard that before have you..

)

Now I don´t have to build my bosoz because my real goal is achieved. Ok, I´m joking a bit.

So, I will buy some extra stuff and try to experiment a bit.

I´ll be back

Good night

Praudio · 10th February 2004, 01:14 AM

Really sorry for you if you are unable to hear sound diff. in transfo, wiring etc.....may be one day you will.

Mad_K · 10th February 2004, 06:06 AM

Quote:

Originally posted by Praudio
Really sorry for you if you are unable to hear sound diff. in transfo, wiring etc.....may be one day you will.

You clearly didn't get my point...

Mad_K · 10th February 2004, 06:35 AM

Quote:

Originally posted by tobias_svensk
Thanks for your answer.

Speaking off diodes.. the 1N4005 for rectifing, there must be something better than that. I have some OnSemi TO220 diodes.
MURH860CT
MSR860

I was thinking off maybe using the MURH´s

Cheers

Same answer as above really. Try both, and you'll find the one you like.
I found that the msr860 sounded very nice, maybe too nice if you know what I mean. Gives a smooth, acoustically "true" sound. I don't know about the murh860ct but I tried mur860 and they give a little more "snappy" sound; apparently more dynamic and agile presentation.

Nelson Pass · 10th February 2004, 03:53 PM

Try all sorts of parts. It's simple enough, and more
entertaining, which is what this is about.

9th February 2004, 05:43 PM	#1
tobias_svensk diyAudio Member Join Date: Jan 2004 Location: Hudiksvall	IRF510 or IRF610 in bosoz? Hello, I just wanna ask wich one of these you guys prefer, in terms of sound quality. If there is a difference... thinking about Rds on them if that maybe could make a difference. Thanks

9th February 2004, 08:38 PM	#2
Praudio diyAudio Member Join Date: Mar 2002 Location: Canada	Transfo, wiring,diodes,capa,solder,volume will do much more on sound quality than the choice of 510/610 . __________________ Praudio

10th February 2004, 01:14 AM	#7
Praudio diyAudio Member Join Date: Mar 2002 Location: Canada	Mad_K Really sorry for you if you are unable to hear sound diff. in transfo, wiring etc.....may be one day you will. __________________ Praudio

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cc-x-bosoz dead wtb: matched irf610	dhole	Pass Labs	10	10th January 2009 12:46 AM
IRF510 Zen amp?	Jeb-D.	Pass Labs	2	19th July 2006 04:09 AM
Question about IRF510	KT	Pass Labs	2	31st August 2005 03:13 AM
D1 I/V stage.....IRF510 or IRF610 ++	Lyra	Pass Labs	2	18th February 2004 06:56 PM
Replace IRF610 with IRF510 how about sound quality?	Nattakorn	Solid State	5	22nd November 2001 05:00 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th February 2004, 09:18 PM	#3
tobias_svensk diyAudio Member Join Date: Jan 2004 Location: Hudiksvall	Thanks for your answer. Speaking off diodes.. the 1N4005 for rectifing, there must be something better than that. I have some OnSemi TO220 diodes. MURH860CT MSR860 I was thinking off maybe using the MURH´s Cheers

9th February 2004, 09:28 PM	#4
Nelson Pass The one and only Join Date: Mar 2001	510 is slightly better in this use.

9th February 2004, 10:58 PM	#6
tobias_svensk diyAudio Member Join Date: Jan 2004 Location: Hudiksvall	Thanks for your answers Nelson and Mad_K ! When I saw that Mr. Pass had answered my post I looked like a combination of this -> (never heard that before have you.. ) Now I don´t have to build my bosoz because my real goal is achieved. Ok, I´m joking a bit. So, I will buy some extra stuff and try to experiment a bit. I´ll be back Good night

10th February 2004, 03:53 PM	#10
Nelson Pass The one and only Join Date: Mar 2001	Try all sorts of parts. It's simple enough, and more entertaining, which is what this is about.

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read