|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Pass Labs This forum is dedicated to Pass Labs discussion. |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Apr 2003
Location: Budapest
|
Hi all,
The CL-60 appears in the original NP-Alephs. Is this generally applicable for the 230 VAC mains, too? Or, european users should get for their lower currents another one? My second question were, could I find anybody from Germany with a surplus of 2 pieces and reasonable offer? Thanks in anticipation, Laci |
|
|
|
#2 |
|
diyAudio Member
Join Date: Sep 2001
Location: Northern California
|
The CL-60 thermistors are negative temperature coefficient devices with a cold resistance of approximately 10 ohms. Any such device with the requisite ampacity rating for the task at hand will substitute.
Cyclotronguy |
|
|
|
#3 |
|
The one and only
|
It works fine on 230, although these days some of our
products have an individual thermistor on each of the two primary windings, so they are in parallel at 120V and series at 240V, which gives identical characteristics. |
|
|
|
#4 |
|
diyAudio Member
Join Date: Apr 2003
Location: Budapest
|
Thanks for the explanations!
Now I should find a pair; shipping from Digikey to Hungary would be a stupid decision, I think. Inside Germany were not too expensive - please, deutsche Kollege, help me with your surplus! Regards, Laci |
|
|
|
#5 |
|
diyAudio Member
|
I can ship to you 2 pcs of CL-70 (15 ohm cold resistance, which actually works better with 220V) free of charge. Just send me your address
|
|
|
|
#6 |
|
diyAudio Member
Join Date: Apr 2003
Location: Budapest
|
Peter, it's great!
You are not only big as technician... You carry other values, too. Details in mail; best regards, Laci |
|
|
|
#7 |
|
diyAudio Member
Join Date: Nov 2003
Location: bolton
|
Hi, just a quick question (please be tollerant I am not as technical as alot on this forum)
Am I right in understanding that these thermistors .... limit the intial current surge that a large Torroiadial can impose (1000va) on intial switch on. On the Aleph-x is there any chance of speaker thump on switch on? Will this reduce the effect???? Finally, on high quality psu I built for Ben Duncans Amp-o2 the power primarys were double clamped with VDR's.....is this good practice on a large class 'a' amp???? Sorry for all the qustions....... Regards Richard, Bolton (nr Manchester) uk
|
|
|
|
#8 |
|
diyAudio Member
Join Date: Apr 2003
Location: Budapest
|
Guys, I am happy!
We have here around a great Mr.Moderator!!! Were solved my biggest problem, "By Air Mail" arrived the promised CL-70 pair. THANK YOU VERY MUCH, PETER! Best wishes from Hungary, Laci |
|
|
|
#9 | |
|
The one and only
|
Quote:
don't have any circuits incorporated to prevent them or disconnect the speaker. |
|
|
![]() |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| inrush current limiter! | lanchile | Chip Amps | 7 | 2nd February 2009 09:20 PM |
| inrush current limiter circuit | Holger Barske | Elektor | 12 | 14th October 2006 10:34 PM |
| Inrush current limiter? | roger-k | Pass Labs | 4 | 19th February 2006 07:42 PM |
| Active Inrush Current Limiter | jackinnj | Solid State | 60 | 28th December 2004 12:44 AM |
| New To Site? | Need Help? |