My finished Aleph 5

tomchaoda · 31st January 2004, 03:05 PM

All,

I presented you my newly finished Aleph 5. I would like to thank to Nelson Pass and all whom I asked the question(s) and got the help from. Without you and diyaudio, it would be a harder journey....

http://www.penguinlovers.net/audio/aleph5_proj.html

I finished my BZLS before my Aleph 5. I will share it with you all after my BZLS journal in the near future.

Thanks again to those who helped me,

Thomas

Alain Dupont · 31st January 2004, 03:25 PM

tomchaoda,

Very nice and beautifull,

Good pictures.

Alain.

roddyama · 31st January 2004, 03:46 PM

Super job Thomas.

It sure does get tight in there with both channels packed into the same case, but you've pulled it off very well.

Taco · 31st January 2004, 05:38 PM

Great job! Usage of all those PCB's looks very proffesional

.

Duck-Twacy · 31st January 2004, 09:00 PM

Very good story on your site. Lots of info for future buiders (and those still building

.

Very nice amp too

tomchaoda · 25th February 2011, 02:04 AM

new location is here:

My Pass Labs Aleph 5 DIY Project

toufu · 25th February 2011, 06:20 AM

Nice job! Mind sharing where you got the case from?

tomchaoda · 4th March 2011, 04:18 PM

Site changed. This the updated URL:

My Pass Labs Aleph 5 DIY Project

31st January 2004, 03:05 PM	#1
tomchaoda diyAudio Member Join Date: Sep 2003 Location: New Jersey	My finished Aleph 5 All, I presented you my newly finished Aleph 5. I would like to thank to Nelson Pass and all whom I asked the question(s) and got the help from. Without you and diyaudio, it would be a harder journey.... http://www.penguinlovers.net/audio/aleph5_proj.html I finished my BZLS before my Aleph 5. I will share it with you all after my BZLS journal in the near future. Thanks again to those who helped me, Thomas

31st January 2004, 03:46 PM	#3
roddyama diyAudio Moderator Emeritus Join Date: Jan 2002 Location: Michigan	Super job Thomas. It sure does get tight in there with both channels packed into the same case, but you've pulled it off very well. __________________ Rodd Yamashita

31st January 2004, 09:00 PM	#5
Duck-Twacy diyAudio Member Join Date: Oct 2002 Location: Holland, The Hague	Very good story on your site. Lots of info for future buiders (and those still building . Very nice amp too __________________ Is that all there is?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aleph P Finished (Well at least 99% done)	kilowattski	Pass Labs	38	5th March 2005 12:04 PM
Aleph-P finished!	PatPet	Pass Labs	21	29th August 2004 07:43 PM
Another Aleph finished!	Edwin Dorre	Pass Labs	31	31st October 2002 06:43 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

31st January 2004, 03:25 PM	#2
Alain Dupont diyAudio Member Join Date: Sep 2003 Location: Paris - France	tomchaoda, Very nice and beautifull, Good pictures. Alain.

31st January 2004, 05:38 PM	#4
Taco diyAudio Member Join Date: Nov 2002 Location: Place in the Netherlands	Great job! Usage of all those PCB's looks very proffesional .

25th February 2011, 02:04 AM	#6
tomchaoda diyAudio Member Join Date: Sep 2003 Location: New Jersey	new location is here: My Pass Labs Aleph 5 DIY Project

25th February 2011, 06:20 AM	#7
toufu diyAudio Member Join Date: Jun 2008 Location: San Francisco	Nice job! Mind sharing where you got the case from?

4th March 2011, 04:18 PM	#8
tomchaoda diyAudio Member Join Date: Sep 2003 Location: New Jersey	Site changed. This the updated URL: My Pass Labs Aleph 5 DIY Project

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read