Forgive what may be a silly question, but my technical knowledge didn't extend beyond a painting by numbers assembly of the F5.
I have purchased some Beyerdynamic T90 headphones (spec below) and was wondering if I can just wire directly from the RCA outs to a female headphone jack.
Many thanks for any pointers or clever suggestions involving resistors.
Transmission type Wired
Headphone design (operating principle) Open
Headphone impedance 250 ohms
Headphone frequency response 5 - 40,000 Hz
Nominal sound pressure level 102 dB (1 mW / 500 Hz)
Construction Circumaural (around the ear)
Cable & plug Gold vaporised mini stereo jack plug (3.5 mm) & 1/4" adaptor (6.35 mm)
Net weight without packaging 425 g
I have purchased some Beyerdynamic T90 headphones (spec below) and was wondering if I can just wire directly from the RCA outs to a female headphone jack.
Many thanks for any pointers or clever suggestions involving resistors.
Transmission type Wired
Headphone design (operating principle) Open
Headphone impedance 250 ohms
Headphone frequency response 5 - 40,000 Hz
Nominal sound pressure level 102 dB (1 mW / 500 Hz)
Construction Circumaural (around the ear)
Cable & plug Gold vaporised mini stereo jack plug (3.5 mm) & 1/4" adaptor (6.35 mm)
Net weight without packaging 425 g
I suggest you this thread:
http://www.diyaudio.com/forums/headphone-systems/127754-f5-headphone-amp-4.html#post2652798
http://www.diyaudio.com/forums/headphone-systems/127754-f5-headphone-amp-4.html#post2652798
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.