I already own 8 x10000uf 50v will be fine????Works. Have or buy ?
ok, then I buy 8 new 18000uf 50v capacitors as used in the 6L6 guide .. thank youon verge of barely enough
make CRC
20mF -0.1R - 20mF
that per rail
hi 6L6 I am mounting my scheche following your guide but, I have two questions; first, the small electrolytic c3 on the board BA-3 MUST BE MOUNTED OR NO? , ACCORDING TO THE QUESTION, I CAN NOT SEE HOW TO CONNECT THE CABLES TO THE BA-3 CARD. YOU CAN PROVIDE LITTLE SPLIT TO THE REGION .. thanks
hi 6L6, x cable connections, now everything is clear to me. But x the chassic ai used a 5Ux400 or 5Ux300? x the PSU not used snubber?The small c3 is a location provided if you choose to use an electrolytic capacitor. You do not need to use it and the other location.
What connections are you not understanding?
5Ux300 ?I used a 5U 400mm because I had one on hand. You could use a 4U as well.
Do not use snubber.
and too small to dispel the heat ??
hi, x the mosfet, I bought vishay. now x p1 and p2 what value do you recommend me: 1k ?? thank you
Which Vishay part? IRF610/IRF9610?
If so, I would go with 1K for P1 and P2.
IRFP240 and 6xIRFP9240Which Vishay part? IRF610/IRF9610?
If so, I would go with 1K for P1 and P2.
- Home
- Amplifiers
- Pass Labs
- BA-3 Amplifier illustrated build guide