Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Pass Labs This forum is dedicated to Pass Labs discussion.

Need soem help with amps
Need soem help with amps
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 30th December 2003, 10:53 PM   #1
Konnan101 is offline Konnan101  United States
diyAudio Member
Join Date: Dec 2003
Send a message via AIM to Konnan101
Default Need soem help with amps

Which aleph amp would be best for these speakers http://home.hetnet.nl/~geenius/Auriga.html

and which one would be best with thesehttp://www.speakerbuilder.net/web_files/Projects/D3/dayton3.htm

I will be playing mostly rock through these speakers, alot of acoustics and vocals as well

also how much about would these amps cost to build
  Reply With Quote
Old 31st December 2003, 04:09 AM   #2
kilowattski is offline kilowattski  United States
diyAudio Member
kilowattski's Avatar
Join Date: Aug 2003
Location: Long Island, New York
Any of the aleph amps can drive the Aurigas as the recommended drivers are very efficient however the Daytons will need 60 watts minimum to play rock music at sufficient levels because they are only 89 db speakers. A stereo Aleph will cost about $750 to $1000 to build between sufficient heat sinks, two toroids, sheet metal, matched FETS, power supply caps, components etc. The cost could well exceed the $1000 if use use very high grade audiophile components. My suggestion is if you have never built an amplifier before to try building the Zen V4. You can see the article on constructing this amp at www.passdiy.com and purchase the circuit cards and matched semiconductors directly from Pass labs for about $100. Beyond that you will need two toroids at about $60 ea. Heat sinks for the power transistors that have a thermal resistance of 0.3 at about $50 each. Components for the circuit cards will be about $60. Power supply components will be another $30. Lastly, the chassis could cost you anywhere from $0 if you salvage something to $150 for something professionally made. Altogether the Zen will cost about $500 to build but it will be a much easier project for a beginner. At the passdiy website there is a gallery of previously DIYed Zen V4's and Alephs. An Aleph would be a very difficult amp to build for a beginner unless you could purchase matched FETS and that would be very expensive. Don't forget you will need a preamp also.
  Reply With Quote


Need soem help with ampsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
SMPS for diy audio amps and multi-channel diy amps (and their power supplies) tlparker Solid State 20 12th May 2015 01:23 PM
For Sale: Tube Amps, Class-A Amps, BG Ribbons, Chassis and Other Goodies! opc Swap Meet 23 2nd November 2009 06:04 PM
Big sale thread: PHL, Raven, Amps, In-wall/ceiling speakers, Amps, VideoRequest mbcouple Swap Meet 2 27th October 2008 11:27 PM
1000A ICEpower amps (Full Linear Amps) nautilus Swap Meet 10 19th December 2007 12:31 AM
Has anyone compared GC amps(LM3875/3886/4780) with other DIY SS amps(Leach,ESP) ? percy Chip Amps 31 13th January 2006 02:33 AM

New To Site? Need Help?

All times are GMT. The time now is 08:11 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio