Pass JLow

Hugo · 29th December 2003, 08:37 PM

I've built the pass jlow......it work really well.....
I try with a monacor speaker, the sph-68x/ad, it's very easy to find it in europa (easier than the jordan), very cheap (~30€) but it's missing upper frequencys. THat's why I plan to had a tweeter, maybe piezo, motorola, will see........
But what basses for a 12cm speaker.........

Thanks nelson.....
Hugo

cowanrg · 30th December 2003, 12:23 AM

pictures.

Nelson Pass · 30th December 2003, 05:58 PM

Glad yo liked it. We're working on an even bigger horn,
and we're going to turn that into the Claw.

till · 22nd February 2004, 10:12 AM

Quote:

We're working on an even bigger horn

any progress? what driver(s)?

Nelson Pass · 22nd February 2004, 07:05 PM

Progress? I don't got to show you no stinkin progress!

(bandido icon here)

The horns will be set up to accept a plate holding whatever
drivers we get our hands on.

Remember, send a pic to the www.passdiy.com gallery
and Dharrington@passlabs.com will send you
DIY logos (coming real soon now).

ingvar ahlberg · 22nd February 2004, 08:25 PM

Bought an old Philips tube stereo radio a while ago, built in spring reverb for ambience!! 40 swedish kronor ( price of a beer at the pub). ripped the reverb for a guitaramp for my son.
BUT! I got a set of speakers with the radio- small walnut boxes that contained a beautiful 6,5" doublecone with alnico magnet.
They look and work as new, measured sensitivity at around 92dB.
I tried them in a coupple of different woigt pipes and do they work!
So maybee build a copy of the western electric horn.
My wife since 20 years has got a very high speaker acceptance factor but this might be crossing the line, must get more room in the workshop.

oliverh · 5th April 2004, 09:01 PM

Hugo,

as far as I know the Monacor is a 12 cm unit and the Jordan a 9 cm... I am not really sure...

Oliver

29th December 2003, 08:37 PM	#1
Hugo diyAudio Member Join Date: Dec 2003 Location: Paris	Pass JLow I've built the pass jlow......it work really well..... I try with a monacor speaker, the sph-68x/ad, it's very easy to find it in europa (easier than the jordan), very cheap (~30€) but it's missing upper frequencys. THat's why I plan to had a tweeter, maybe piezo, motorola, will see........ But what basses for a 12cm speaker......... Thanks nelson..... Hugo

22nd February 2004, 08:25 PM	#6
ingvar ahlberg diyAudio Member Join Date: Feb 2004 Location: Kungsbacka on the Swedish westcoast	Bought an old Philips tube stereo radio a while ago, built in spring reverb for ambience!! 40 swedish kronor ( price of a beer at the pub). ripped the reverb for a guitaramp for my son. BUT! I got a set of speakers with the radio- small walnut boxes that contained a beautiful 6,5" doublecone with alnico magnet. They look and work as new, measured sensitivity at around 92dB. I tried them in a coupple of different woigt pipes and do they work! So maybee build a copy of the western electric horn. My wife since 20 years has got a very high speaker acceptance factor but this might be crossing the line, must get more room in the workshop. __________________ Ingvar

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Low Pass and Mid/High Pass (Bass Blocking) Filters	runslikealpaca	Everything Else	1	19th June 2009 10:59 PM
Paging Mr. Pass, Mr. Pass pull my finger please.	khundude	Pass Labs	2	5th December 2008 04:11 AM
Pass Tharagard A75 vs Pass Aleph 1.2's	daly41k	Pass Labs	7	18th February 2007 03:10 PM
pass aleph P VS pass X2 first version	perusicchio	Pass Labs	10	5th March 2004 10:06 AM
My opinion on Pass Labs and Mr. Pass (Nelson) himself	b_online	Pass Labs	11	21st May 2003 12:39 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th December 2003, 12:23 AM	#2
cowanrg diyAudio Member Join Date: Apr 2002 Location: Lafayette, CO	pictures.

30th December 2003, 05:58 PM	#3
Nelson Pass The one and only Join Date: Mar 2001	Glad yo liked it. We're working on an even bigger horn, and we're going to turn that into the Claw.

22nd February 2004, 07:05 PM	#5
Nelson Pass The one and only Join Date: Mar 2001	Progress? I don't got to show you no stinkin progress! (bandido icon here) The horns will be set up to accept a plate holding whatever drivers we get our hands on. Remember, send a pic to the www.passdiy.com gallery and Dharrington@passlabs.com will send you DIY logos (coming real soon now).

5th April 2004, 09:01 PM	#7
oliverh diyAudio Member Join Date: Apr 2004 Location: Munich Germany	Hugo, as far as I know the Monacor is a 12 cm unit and the Jordan a 9 cm... I am not really sure... Oliver

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)