Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Pass Labs This forum is dedicated to Pass Labs discussion.

Aleph J illustrated build guide
Aleph J illustrated build guide
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 17th July 2018, 06:45 AM   #2671
mcgreg66 is offline mcgreg66  Germany
diyAudio Member
 
Join Date: Nov 2010
Location: Berlin
Had to trim R27 down to 22k......
  Reply With Quote
Old 17th July 2018, 06:54 AM   #2672
chede is offline chede  Germany
... fascinated by amps
diyAudio Member
 
chede's Avatar
 
Join Date: Jan 2016
Location: In the Düsseldorf suburbs
Aleph J illustrated build guide
Hallo Gregor,

congratulations!
Fuse value should be the lowest that doesn‘t blow on start-up.

A good starting point is half the value that the folks with 120 V AC mains use.
In my Aleph J build, I have 1.25 or 1.6 amp rated fuse. I use a single CL-60 in series with the mains for slow-start.

Best regards, Claas
  Reply With Quote
Old 17th July 2018, 07:24 AM   #2673
mcgreg66 is offline mcgreg66  Germany
diyAudio Member
 
Join Date: Nov 2010
Location: Berlin
Default Here it is .... :)

Hope image shows up ....
Attached Images
File Type: jpg 45A8C44F-D0FE-4EA1-858C-1D7C87A6078A.jpg (800.3 KB, 117 views)
  Reply With Quote
Old 17th July 2018, 08:49 AM   #2674
Marra is offline Marra  United Kingdom
diyAudio Member
 
Join Date: Nov 2009
Location: Near Lincoln
Aleph J illustrated build guide
Nicely done
  Reply With Quote
Old Yesterday, 12:52 AM   #2675
vlv81 is offline vlv81  New Zealand
diyAudio Member
 
Join Date: Aug 2017
Hi all, just wondering if anyone has run Q Acoustics 3050's with the Aleph J. I can get a pair for a great price. Only concern is they are 6ohm nominal, but 92db sensitivity. I can't imagine I will run the amp into clipping with the level I listen at, not trying to recreate concert volume, but want to be sure. I know the amp is rated at 13watts 4ohm on the First Watt site and thought it said Mr Pass doesn't know of a load that will damage it. A newbie question I know...
  Reply With Quote
Old Yesterday, 12:53 AM   #2676
6L6 is offline 6L6  United States
diyAudio Moderator
 
6L6's Avatar
 
Join Date: Oct 2010
Location: Denver, Colorado
Aleph J illustrated build guide
6ohm and 92db are very sensitive in comparison to most modern speakers. They will be a great match.
  Reply With Quote
Old Yesterday, 12:55 AM   #2677
vlv81 is offline vlv81  New Zealand
diyAudio Member
 
Join Date: Aug 2017
Thanks Jim, very much appreciated!
  Reply With Quote

Reply


Aleph J illustrated build guideHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
An illustrated guide to building an F5 6L6 Pass Labs 999 30th May 2018 10:33 PM
MyRefC build guide AndrewT Chip Amps 1119 29th July 2016 10:30 PM
An illustrated guide for Aleph 60 builders PKI Pass Labs 58 12th October 2013 07:13 PM
Aleph J Stuffing guide ? thor61 Pass Labs 2 4th September 2011 08:02 PM
My first step by step LM3886 illustrated build kgb_m3 Chip Amps 19 17th February 2010 04:46 PM


New To Site? Need Help?

All times are GMT. The time now is 01:59 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki