X150 : +/-35Vdc
X250 : +/-45Vdc
XA30 : +/-25Vdc
XA60 : around same-ish
Since the psu looks way too low for the power it delivers.
for a 150w class AB is it just 35V? since there will be losses...
where did u get these psu values?
you know that all these amps are bridged , in topology ?
values I got ...... according to prior posts , I fished it
(having little spy bird in PL , and measuring thing or two , prior to scorching items in Official PL Disposal Facility )
ohh are these bridged? it means that each of the bridged is capable to drive in 2 ohms is this possible because of many output hexfets?
so X150.5 has total 20 IRFs on the output per channel so does this mean 5 x irf240 and 5 x irf9240 and having such two modules bridged?
you know that all these amps are bridged , in topology ?
values I got ...... according to prior posts , I fished it
(having little spy bird in PL , and measuring thing or two , prior to scorching items in Official PL Disposal Facility )
yeah you are very good at fishing
but i have a doubt regarding the irfp240 9240 considering if we have 10 pairs at the output so using it at +/-45v will the amp be stable in 4 ohms after bridged?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Pass Labs
- psu voltages of x150 x250 and xa30 x60?