Relays gold plated

inertial · 14th January 2013, 10:19 AM

Hi!

I need some relays for signal (very little current) dual positions, gold plated, and inert atmosphere. I need to know where I can purchase them with shipping to Italy (Europe would be better).

Thanks!

Bksabath · 11:57 AM

Perche li cerchi, tanti relays che comperiamo qui sono fatti in Italia

Why you looking for those here the relays we get are often made in Italy...

Any way try RS Components
You are welcome

Are those for speaker protection?
If so Amplimo does a speciall type just for this purposes

inertial · 14th January 2013, 02:52 PM

Please in RS I have found about 5000 relays of signal, and it isn't specified if gold plated. Do you have some code number?

Thanks!

Zen Mod · 14th January 2013, 03:30 PM

takamisawa ry5W-k

https://www.google.com/search?as_st=...r_BcHStAbZ24EY

Bksabath · 14th January 2013, 03:47 PM

Quote:

Originally Posted by inertial

Please in RS I have found about 5000 relays of signal, and it isn't specified if gold plated. Do you have some code number?

Thanks!

Perche li cerchi?
Che tipo di lavoro.

Why you looking for?
What kind of job?

Input low signal?
Output hi signall?

AC?
DC?

Tick box as aplicable and the 5000 will go down
Why gold ok not tarnish but hi resistance
Silver low resistance
Phosphor Bronze hi current.

inertial · 15th January 2013, 10:18 AM

Forgive me, I'm a rookie.
The relay is on the input signal. Very low current. Two positions.

Thanks.

Zen Mod · 15th January 2013, 10:45 AM

Quote:

Originally Posted by Zen Mod

takamisawa ry5W-k

https://www.google.com/search?as_st=...r_BcHStAbZ24EY

wintermute · 15th January 2013, 11:06 AM

I'm planning on using the panasonic DS series relays http://www.newark.com/pdfs/datasheet.../DS-RELAYS.pdf in my preamp. I will be using latching types (but that does require the design of some control circuitry as well). perhaps something like this DS2E-M-DC12V - PANASONIC EW - RELÈ, PCB, DPCO, 12VDC | Farnell Italia ??

Tony.

Bksabath · 15th January 2013, 11:06 AM

In this case listen to Migty Zen

AndreaFx · 17th January 2013, 06:28 AM

You can try these

https://www.distrelec.it/rel%C3%A8-d...i/fujitsu/a-wk

14th January 2013, 10:19 AM	#1
inertial diyAudio Member Join Date: Aug 2004 Location: Italy	Relays gold plated Hi! I need some relays for signal (very little current) dual positions, gold plated, and inert atmosphere. I need to know where I can purchase them with shipping to Italy (Europe would be better). Thanks!

14th January 2013, 11:55 AM	#2
Bksabath diyAudio Member Join Date: Dec 2007	Perche li cerchi, tanti relays che comperiamo qui sono fatti in Italia Why you looking for those here the relays we get are often made in Italy... Any way try RS Components You are welcome Are those for speaker protection? If so Amplimo does a speciall type just for this purposes Last edited by Bksabath; 14th January 2013 at 11:57 AM.

14th January 2013, 03:30 PM	#4
Zen Mod diyAudio Member Join Date: Jan 2003 Location: ancient Batsch , behind Iron Curtain	takamisawa ry5W-k https://www.google.com/search?as_st=...r_BcHStAbZ24EY __________________ my Papa is smarter than your Nelson ! tnx to clean thread ; Cook Book ; PSM LS Cook Book ; Baby Diyaudio FORUM ; Mighty ZM's Bloggg;I'm dumb

15th January 2013, 11:06 AM	#8
wintermute just another diyAudio Moderator Join Date: Aug 2003 Location: Sydney Blog Entries: 22	I'm planning on using the panasonic DS series relays http://www.newark.com/pdfs/datasheet.../DS-RELAYS.pdf in my preamp. I will be using latching types (but that does require the design of some control circuitry as well). perhaps something like this DS2E-M-DC12V - PANASONIC EW - RELÈ, PCB, DPCO, 12VDC \| Farnell Italia ?? Tony. __________________ Any intelligence I may appear to have is purely artificial! Some of my photos

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th January 2013, 02:52 PM	#3
inertial diyAudio Member Join Date: Aug 2004 Location: Italy	Please in RS I have found about 5000 relays of signal, and it isn't specified if gold plated. Do you have some code number? Thanks!

15th January 2013, 10:18 AM	#6
inertial diyAudio Member Join Date: Aug 2004 Location: Italy	Forgive me, I'm a rookie. The relay is on the input signal. Very low current. Two positions. Thanks.

17th January 2013, 06:28 AM	#10
AndreaFx diyAudio Member Join Date: Jan 2008	You can try these https://www.distrelec.it/rel%C3%A8-d...i/fujitsu/a-wk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gold plated or Rhodium plated connectors are better	gaborbela	Swap Meet	3	17th June 2010 06:10 AM
WANTED! Gold-plated reed relays	Tolu	Parts	6	22nd November 2007 01:24 AM
Gold-plated reed relays	Tolu	Parts	2	11th August 2007 08:17 AM
Gold plated jacks to...	johnferrier	Everything Else	1	21st December 2003 05:09 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read