Stasis 2 help and other Questions

hrad · 10th November 2012, 12:29 PM

I just picked up a Stasis 2. It does not sound as good as my 4000's. I am using a Pioneer Vsx-59txi as pre-amp instead of a Threshold like with the 4000's. Every time I replace the line/power fuse with a fast blow it opens. It operates fine with the standard one it had in. I can not find schematic.

I never replaced any parts in my 4000's. Is that dangerous after all these years? What should I replace and with what?

I almost purchased a Nakamichi PA-7. How do the compare to the Thresholds?
The one I was looking at could be powered by 220v. Would that sound the same? Save energy?

Thanks!

Nelson Pass · 10th November 2012, 03:02 PM

hrad · 11th November 2012, 02:14 PM

Any thoughts appreciated when you have time.

Andersonix · 12th November 2012, 12:38 AM

What is the device "T 1K" in the center of attached pic?

Nelson Pass · 12th November 2012, 12:52 AM

I recall it is a 1K ohm thermistor.

10th November 2012, 12:29 PM	#1
hrad diyAudio Member Join Date: Mar 2004 Location: Cleveland, OH	Stasis 2 help and other Questions I just picked up a Stasis 2. It does not sound as good as my 4000's. I am using a Pioneer Vsx-59txi as pre-amp instead of a Threshold like with the 4000's. Every time I replace the line/power fuse with a fast blow it opens. It operates fine with the standard one it had in. I can not find schematic. I never replaced any parts in my 4000's. Is that dangerous after all these years? What should I replace and with what? I almost purchased a Nakamichi PA-7. How do the compare to the Thresholds? The one I was looking at could be powered by 220v. Would that sound the same? Save energy? Thanks!

11th November 2012, 02:14 PM	#3
hrad diyAudio Member Join Date: Mar 2004 Location: Cleveland, OH	Thanks! Any thoughts appreciated when you have time.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
threshold stasis 2	docjoe	Solid State	3	10th November 2012 12:05 PM
Stasis 1 pics	Nelson Pass	Pass Labs	16	7th April 2007 08:18 PM
Stasis One Meter	bagigios	Pass Labs	0	22nd December 2006 02:37 PM
STASIS 2 problem	WolfgangL	Pass Labs	27	27th September 2005 03:28 AM
Threshold Stasis 3, too	Roscor61	Pass Labs	3	20th May 2004 09:12 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

12th November 2012, 12:52 AM	#5
Nelson Pass The one and only Join Date: Mar 2001	I recall it is a 1K ohm thermistor.