diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   Stasis 2 help and other Questions (http://www.diyaudio.com/forums/pass-labs/223279-stasis-2-help-other-questions.html)

hrad 10th November 2012 12:29 PM

Stasis 2 help and other Questions
 
I just picked up a Stasis 2. It does not sound as good as my 4000's. I am using a Pioneer Vsx-59txi as pre-amp instead of a Threshold like with the 4000's. Every time I replace the line/power fuse with a fast blow it opens. It operates fine with the standard one it had in. I can not find schematic.

I never replaced any parts in my 4000's. Is that dangerous after all these years? What should I replace and with what?

I almost purchased a Nakamichi PA-7. How do the compare to the Thresholds?
The one I was looking at could be powered by 220v. Would that sound the same? Save energy?

Thanks!;)

Nelson Pass 10th November 2012 03:02 PM

1 Attachment(s)
:cool:

hrad 11th November 2012 02:14 PM

Thanks!
 
Any thoughts appreciated when you have time. :hohoho:

Andersonix 12th November 2012 12:38 AM

1 Attachment(s)
What is the device "T 1K" in the center of attached pic?

Nelson Pass 12th November 2012 12:52 AM

I recall it is a 1K ohm thermistor.

:cool:


All times are GMT. The time now is 07:25 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2