diyAudio (
-   Pass Labs (
-   -   SJEP120R100 Question (

ultrafi 9th August 2012 10:07 PM

SJEP120R100 Question
I have some SJEP120R100 that I like to put to use. Does anyone have an operating point that they'd like to recommend?

Any other devices that you prefer over the SJEP120R100?


Zen Mod 9th August 2012 10:30 PM

F6 maybe ?

6L6 10th August 2012 01:10 PM

At Burning Amp, Nelson suggested building a De-Lite with them.

Vgs should be in the neighborhood of 1.2v

flg 11th August 2012 12:45 AM

20-30W Depending on Heat Sink. As much current as you can manage, ie; 1-2A. Of coarse it really depends on what your building???

kasey197 12th August 2012 05:02 PM

Out of curiosity ... Do these have the same tendency as mosfets toward oscillation ? Hence nice fat gate stoppers are a must ?

flg 13th August 2012 12:33 PM

200 is ussually a safe value :D

Loudthud 13th August 2012 07:18 PM

I looked at the Semi South data sheets. The transfer characteristic curve of the SJEP120R100 is a gentle curve, much better than the IRF parts. It doesn't straighten out until very high currents. The transfer characteristic curve for the SJDP120R340 is much straigher at low currents around 1 amp however, the curves are plotted at a fixed drain to source voltage of 5V. The part may not be so linear in actual class A linear operation unless you cascode it.

kasey197 14th August 2012 07:15 AM


Originally Posted by flg (Post 3124719)
200 is ussually a safe value :D

Gotcha thanks!

All times are GMT. The time now is 06:55 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2