Using CCS's on the positive rail will require some offset
stabilization not included in the original circuit, but is
otherwise do-able, and will result in a more efficient circuit
with even less damping factor.
ZV6 will be addressing this, so watch for it.
Regulating the supplies works well too.
stabilization not included in the original circuit, but is
otherwise do-able, and will result in a more efficient circuit
with even less damping factor.
ZV6 will be addressing this, so watch for it.
Regulating the supplies works well too.
an updated SOZ cool!!!
i built a regulated supply for my SOZ, from the Zen variations Part 3
article, and it worked quite well. So you should try that out while
waiting for Zen V6. For some reason though, i'm back to using a
Pi filter for my X-SOZ attempt (a la Henrik's schematic).
With all the presents from Mr. Pass lately, i think he figured out a way to
get UPS to deliver some extra hours for his days 
cool!!!i built a regulated supply for my SOZ, from the Zen variations Part 3
article, and it worked quite well. So you should try that out while
waiting for Zen V6. For some reason though, i'm back to using a
Pi filter for my X-SOZ attempt (a la Henrik's schematic).
With all the presents from Mr. Pass lately, i think he figured out a way to
get UPS to deliver some extra hours for his days
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.