Another one from 2003. ... 
http://www.diyaudio.com/forums/solid-state/11162-transformer-driven-sepp-output-stage.html
http://www.diyaudio.com/forums/solid-state/11162-transformer-driven-sepp-output-stage.html
Last edited:
Would it provide enough voltage? Probably. The original specified 5.1 wasn't enough. I went to a 9.1V zener.
I live the idea of a LM329. I haven't used them enough to know if they are a direct replacement for the Zener or LED string in this application. Hopefully somebody with more experience can chime in.
Paging Mr. Pass, Mr. Pass, please pick up the white courtesy telephone...
I live the idea of a LM329. I haven't used them enough to know if they are a direct replacement for the Zener or LED string in this application. Hopefully somebody with more experience can chime in.
Paging Mr. Pass, Mr. Pass, please pick up the white courtesy telephone...
not exactly Pa , but at least beard of mine is white in same amount ....... if telephone isn't 
use whatever you want , as long you put at least 3mA through reference
so , 3-5mA is good enough
though , generally , no special benefit of using there ref. chips with capability to work flawlessly at miniscule currents
use whatever you want , as long you put at least 3mA through reference
so , 3-5mA is good enough
though , generally , no special benefit of using there ref. chips with capability to work flawlessly at miniscule currents
avoid solid core connecting to pcbs , you'll have reliability issues in time
think about vibrations
regarding bigger wire - superfine loudsp wire is flexible and nice for task
see how :
Papa’s Koan (M)2 , an amp for living room | Zen Mod Blog
think about vibrations
regarding bigger wire - superfine loudsp wire is flexible and nice for task
see how :
Papa’s Koan (M)2 , an amp for living room | Zen Mod Blog
