A new BBA3

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hello,

Firstly, thank you to Nelson Pass for his kindness and his pleasure to share his expertise with DIYers.

With various publications on the BA3-BBA3 Burning Amp amplifiers, I built my version of BBA3.

It is an adaptation of the front end of the BA3-BBA3 and the output stage is that of BA1 ,with by channel, 20 MOSFET, single-ended Class A output follower stage, biased by a constant current source.

The front end is connected to Jung PSU (+/- 30V).

With its bias of 5.3 A at + / - 32V, power is 50 watts into 8 and 4 ohms and 25 watts into 2 ohms.

I use an RCA / XLR adapter for the SE connection combined with a switch ( gain of 20dB with RCA or XLR inputs).

Regards

Darry
 

Attachments

  • FE-BBA3.pdf
    91.7 KB · Views: 391
  • Output-BBA3.pdf
    34.7 KB · Views: 339
  • Pict1.JPG
    Pict1.JPG
    71.8 KB · Views: 698
  • Pic2.JPG
    Pic2.JPG
    89.4 KB · Views: 689
  • Pic3.JPG
    Pic3.JPG
    92.8 KB · Views: 685
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.