Well, here:
http://www.diyaudio.com/forums/pass-labs/56454-my-good-old-new-aleph.html#post632228
That black box.
http://www.diyaudio.com/forums/pass-labs/56454-my-good-old-new-aleph.html#post632228
That black box.
I ve been reading about the Gate resistor and the datasheets usually say around 10 ohms, up to whatever is needed to cancel EMI problems, which we don't have here. So I will now test to replace all of them by some 22 ohms, just to see the diff.
has anyone tried ?
well , usually is nothing wrong with part values , written in Papa's schematics
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.