Parallel B1 buffer possible?
Would coupling the outputs (after the output resistor) of multiple b1 buffers cause any problems?
I'm wondering if this technique could be employed to lower output impedance to the point that you could drive headphones directly.
Any advice wold be gratefully received :)
But fur an application like this, no gain but current needed, I would eventually use the j310 with appropriate source resistors.
|All times are GMT. The time now is 02:39 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright ©1999-2016 diyAudio