Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Pass Labs This forum is dedicated to Pass Labs discussion.

F5 Turbo Builders Thread
F5 Turbo Builders Thread
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 5th March 2013, 05:17 PM   #1481
Zen Mod is online now Zen Mod  Serbia
Official Court Jester
diyAudio Member
 
Zen Mod's Avatar
 
Join Date: Jan 2003
Location: ancient Batsch , behind Iron Curtain
F5 Turbo Builders Thread
Quote:
Originally Posted by zoe View Post
1.......
If this is not clear let me know and I'll elaborate.
huh

disconnect all wires

then :

+ side from first bridge connect to point marked XX
- side from first bridge connect to point F
- side from second bridge connect to point XX
+ side from second bridge connect to point L

+ input to first choke goes from point M
- input to second choke goes from point x

fat bridge from point XX to point 15+z

output end of first choke goes to point W
output end of second choke goes to point s

positive rail to both amp pcbs from point q
negative rail to both amp pcbs from point c
gnd rail to both amp pcbs from point 15+z
NTC to chassis from point 15+z

connect fat wire bridge between two main gnd points on channel's pcbs (left ch. pcb gnd pad - fat wire - right ch. pcb gnd pad )

each speaker gnd goes from own channels pcb gnd point

each RCA gnd goes to own channels pcb gnd point
Attached Images
File Type: jpg MESS.jpg (161.5 KB, 358 views)
File Type: jpg ganjarock_candy.jpg (101.9 KB, 330 views)
__________________
my Papa is smarter than your Nelson !
clean thread; Cook Book;PSM LS Cook Book;Baby DiyA ;Mighty ZM's Bloggg;Papatreasure;Papa...© by Mighty ZM

Last edited by Zen Mod; 5th March 2013 at 05:29 PM.
  Reply With Quote
Old 5th March 2013, 09:48 PM   #1482
WalterW is offline WalterW  Netherlands
diyAudio Member
 
Join Date: Oct 2012
Location: Utrecht
F5 Turbo Builders Thread
Respect, for figuring that out....
  Reply With Quote
Old 5th March 2013, 09:58 PM   #1483
Zen Mod is online now Zen Mod  Serbia
Official Court Jester
diyAudio Member
 
Zen Mod's Avatar
 
Join Date: Jan 2003
Location: ancient Batsch , behind Iron Curtain
F5 Turbo Builders Thread
nuttin' without proper candies

__________________
my Papa is smarter than your Nelson !
clean thread; Cook Book;PSM LS Cook Book;Baby DiyA ;Mighty ZM's Bloggg;Papatreasure;Papa...© by Mighty ZM
  Reply With Quote
Old 5th March 2013, 10:30 PM   #1484
a.wayne is offline a.wayne  United States
Sin Bin
 
Join Date: May 2008
Location: Front Row Center
are we there yet .....?
  Reply With Quote
Old 5th March 2013, 10:38 PM   #1485
6L6 is offline 6L6  United States
diyAudio Moderator
 
6L6's Avatar
 
Join Date: Oct 2010
Location: Denver, Colorado
F5 Turbo Builders Thread
Well, we are one step closer, I put the source diodes back in the circuit and it's still stable. I have not had a chance to get it nice and hot at full bias, I had to go pick up my toddler (well, whatever 3 1/2 is) , and he's down for a nap

Again, we need separate verification that all is good. But things are looking very hopeful.
  Reply With Quote
Old 5th March 2013, 10:51 PM   #1486
a.wayne is offline a.wayne  United States
Sin Bin
 
Join Date: May 2008
Location: Front Row Center
Sounds Good, now to wake up Buzz .........
  Reply With Quote
Old 5th March 2013, 11:17 PM   #1487
Variac is offline Variac  Costa Rica
diyAudio Editor
 
Variac's Avatar
 
Join Date: Dec 2001
Location: San Francisco, USA San Josť, Costa Rica
F5 Turbo Builders Thread
Papa warns on the F-5 that the inputs and outputs need to be well separated. Is it possible that your wiring or the board traces are in too close proximity?
__________________
"The geek shall inherit the earth"
2017 Burning Amp is November 12 in S.F. Thread here on diyAudio:
http://www.diyaudio.com/forums/clubs...francisco.html
  Reply With Quote
Old 6th March 2013, 01:45 AM   #1488
nrg2009 is offline nrg2009  United States
diyAudio Member
 
Join Date: Apr 2009
Location: Detroit, born and raised in the netherlands.
mighty ZM did it again, great job.

Great job to everyone. We are very close, the last moments are the toughest.
  Reply With Quote
Old 6th March 2013, 02:33 AM   #1489
6L6 is offline 6L6  United States
diyAudio Moderator
 
6L6's Avatar
 
Join Date: Oct 2010
Location: Denver, Colorado
F5 Turbo Builders Thread
Quote:
Originally Posted by Variac View Post
Papa warns on the F-5 that the inputs and outputs need to be well separated. Is it possible that your wiring or the board traces are in too close proximity?
Hmmm... I have no idea. But with the seperate output boards the outputs seem kinda far, so to speak. I would guess (and it's a guess, nothing more) that the wiring between the FE board and the output board could be more of a problem.

See if Papa can take a glance at the PCBs, he might have some insights.
  Reply With Quote
Old 6th March 2013, 08:56 AM   #1490
buzzforb is offline buzzforb  United States
diyAudio Member
 
buzzforb's Avatar
 
Join Date: Oct 2010
Location: Burlington, NC
Goy one channel biased last night. No apparent issue. Will try the other tonight, then ill check for problems. Jim, what scope do you have?
__________________
...Shape the sound , Man!
  Reply With Quote

Reply


F5 Turbo Builders ThreadHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
B1 builders thread Bas Horneman Pass Labs 728 12th March 2018 06:45 PM
F5 Turbo is posted Nelson Pass Pass Labs 638 27th December 2017 06:12 PM
F5 Turbo Circuit Boards chchyong89 Pass Labs 2404 8th October 2017 07:14 PM
F5 turbo problems Rob Dingen Pass Labs 17 11th January 2013 08:38 PM
F5 Turbo ............. if only !!!!!! a.wayne Pass Labs 23 21st January 2012 02:24 AM


New To Site? Need Help?

All times are GMT. The time now is 08:04 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki