F5 Turbo Circuit Boards - Page 6

UKToecutter · 13th February 2012, 06:43 PM

Quote:

Originally Posted by sangram

Is it my imagination, or is D4 not in the same mounting plane as the rest of the flat-pack devices?

OK. Should be sorted now.

Bksabath · 07:32 PM

Quote:

Originally Posted by UKToecutter

OK. Should be sorted now.

got it

But you can still move R11 to the left of the Thermistor same for R12 to the right

UKToecutter · 13th February 2012, 07:25 PM

Quote:

Originally Posted by Bksabath

got it

But you can still move R11 to the left of the Thermistor

Well......
I could but that would mean offsetting the thermistor from the centre of Q3 or moving the gate resistor. Don't you think the symmetry is 'pretty'??

Bksabath · 13th February 2012, 07:40 PM

Course is fine just a bit shorther tracks could shift R11 a bit like you did for R12
and R12 to other side of thermistor let you pick up voltagge from the mosfet is bolted 2.

But I am just being fussy get yourself a well deserwed pint
etch one proto and sleep over it

bykoz · 13th February 2012, 08:00 PM

My designs.

UKToecutter · 13th February 2012, 08:13 PM

Quote:

Originally Posted by Bksabath

Course is fine just a bit shorther tracks could shift R11 a bit like you did for R12
and R12 to other side of thermistor let you pick up voltagge from the mosfet is bolted 2.

But I am just being fussy get yourself a well deserwed pint
etch one proto and sleep over it

OK, How's this

UKToecutter · 13th February 2012, 08:16 PM

I think I'll trim off the waste board on each size. Should make manufacture a little cheaper. Even with the thickness of the tracks as they are I think I might go for 2oz board. Do you think 1.6mm board is thick enough or shall I go for 2mm?

Bksabath · 13th February 2012, 11:25 PM

IMO
2 OZ is much beter

1.6 is fine won't make much difference

eyoung · 13th February 2012, 11:54 PM

Be sure and ask for Papa's blessing, silk screen diy clone pass design on board, plus we don't mind if you make money. this is a hobby not a profession . Mr Pass(AKA Papa) is very generous with his Ideas and help. We would like to keep it that way.

Old guy in SC, Elwood

UKToecutter · 13th February 2012, 11:58 PM

No no.
You're right, this is a hobby.
If I do make a batch (only with NP's blessing of course) then I will sell at my cost plus a couple of dollars per set as a donation to the forum.

I have already put attribution on the silk screen.

Regards

Andy

Old guy in London, England :-)

13th February 2012, 11:54 PM	#59
eyoung diyAudio Member Join Date: Aug 2007 Location: Sunny SC,USA 15 min south of Charlotte NC	Be sure and ask for Papa's blessing, silk screen diy clone pass design on board, plus we don't mind if you make money. this is a hobby not a profession . Mr Pass(AKA Papa) is very generous with his Ideas and help. We would like to keep it that way. Old guy in SC, Elwood __________________ "Sometimes obstacles are put in our way to make us slow down so that we can enjoy the journey and appreciate the destination when we eventually get there"

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
F5 Turbo is posted	Nelson Pass	Pass Labs	589	1st March 2013 01:19 AM
F5 clone boards (inc PSU boards)	Tazzz	Swap Meet	18	24th January 2013 12:43 AM
F5 turbo problems	Rob Dingen	Pass Labs	17	11th January 2013 08:38 PM
F5 Turbo ............. if only !!!!!!	a.wayne	Pass Labs	23	21st January 2012 02:24 AM
UGS Boards and F5 boards	DUC985	Swap Meet	0	7th January 2009 07:21 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th February 2012, 07:40 PM	#54
Bksabath diyAudio Member Join Date: Dec 2007	Course is fine just a bit shorther tracks could shift R11 a bit like you did for R12 and R12 to other side of thermistor let you pick up voltagge from the mosfet is bolted 2. But I am just being fussy get yourself a well deserwed pint etch one proto and sleep over it

13th February 2012, 08:00 PM	#55
bykoz diyAudio Member Join Date: Sep 2009 Location: BURSA	My designs.

13th February 2012, 08:16 PM	#57
UKToecutter diyAudio Member Join Date: Jan 2010 Location: Harrow, UK	I think I'll trim off the waste board on each size. Should make manufacture a little cheaper. Even with the thickness of the tracks as they are I think I might go for 2oz board. Do you think 1.6mm board is thick enough or shall I go for 2mm?

13th February 2012, 11:25 PM	#58
Bksabath diyAudio Member Join Date: Dec 2007	IMO 2 OZ is much beter 1.6 is fine won't make much difference

13th February 2012, 11:58 PM	#60
UKToecutter diyAudio Member Join Date: Jan 2010 Location: Harrow, UK	No no. You're right, this is a hobby. If I do make a batch (only with NP's blessing of course) then I will sell at my cost plus a couple of dollars per set as a donation to the forum. I have already put attribution on the silk screen. Regards Andy Old guy in London, England :-)