I have a few questions about the v2 version:
what sort of power output could we expect into 6ohm speakers?
What would be an appropriate transformer rating for such output?
If mounting the 4 output devices and the 2 "double" diodes in one heatsink, what w/c value should one look for?
what sort of power output could we expect into 6ohm speakers?
What would be an appropriate transformer rating for such output?
If mounting the 4 output devices and the 2 "double" diodes in one heatsink, what w/c value should one look for?
So let me ask a question about configurations --
I am trying to use higher voltage transformers, but am not concerned about ultimate power output. My transformers are 49v-0-49v
Can the v3 version be used as drawn with only 2 or 3 output pairs? The heatsinking required with the 4 pairs seems to be huge.
I am trying to use higher voltage transformers, but am not concerned about ultimate power output. My transformers are 49v-0-49v
Can the v3 version be used as drawn with only 2 or 3 output pairs? The heatsinking required with the 4 pairs seems to be huge.
Very interesting reading. Thanks for such an elaborate and thorough manual.
I noticed a couple of changes to the F5 circuit. R17 & R18 are now 100 ohm. And the gate resistors are 100 ohm. I have boards which I built last year. I guess it's not cricital to change those resistors? I don't want to risk my nicely assembled boards.
Thanks again
I noticed a couple of changes to the F5 circuit. R17 & R18 are now 100 ohm. And the gate resistors are 100 ohm. I have boards which I built last year. I guess it's not cricital to change those resistors? I don't want to risk my nicely assembled boards.
Thanks again
Well, clearly this stuff can't possibly be any good - too many parts!
Get rid of some of them like in an F5, and maybe the guy who came up with this stuff might, maybe, have something going on!
Imagine the impunity to suggest a 100watt amplifier!
Well, that says it all right there.
_-_-bear
Get rid of some of them like in an F5, and maybe the guy who came up with this stuff might, maybe, have something going on!
Imagine the impunity to suggest a 100watt amplifier!
Well, that says it all right there.
_-_-bear
Thanks for the article Nelson!
Will there be new F5 Turbo V3 boards available at DIYAudio Store?
Shouldn't we open a new thread for the F5 Turbo?
This is a valid claim!
Given the popularity of the F5s I think there should be a seperate topic for each: F5 classic, F5 Turbo V1, F5 Turbo V2 and V3.
Builders would be helped to focus in that way...
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Pass Labs
- F5 Turbo is posted