diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   pass labs x2-1 (http://www.diyaudio.com/forums/pass-labs/204029-pass-labs-x2-1-a.html)

miguelnoda 8th January 2012 03:35 PM

pass labs x2-1
 
For Nelson Pass
I wonder if you could get the X2-1 PBC as resistors 3.3k3W PBC Burned me know if it's not a problem or is so
for hours of use, if not would have got way to update it.
Thanks, Miguel

miguelnoda 8th January 2012 09:32 PM

Anyone know if you can replace the PBC on the x2-1, if someone sells or is cloned, mine is bad for the 3.3K resistors burned him enough.
a greeting

generg 9th January 2012 05:59 AM

Hi Miguel !

I do not think you will have a chance to get a new or a clone board.

Why do you not solder with some wire new connections for the two 3k6!

But be aware that the IRF 610 also could be damaged, look at the service manual for the sourounding components and check all voltages according the service manual.

:) only chance maybe to ask Mr. Pass directly, look for his email on the First Watt page.

Nelson Pass 9th January 2012 06:17 PM

Quote:

Originally Posted by miguelnoda (Post 2852059)
For Nelson Pass
I wonder if you could get the X2-1 PBC as resistors 3.3k3W PBC Burned me know if it's not a problem or is so
for hours of use, if not would have got way to update it.
Thanks, Miguel

I'm sorry to tell you that we no longer have that board in stock. Fabricating
a one-off would cost too much, so I suggest that you simply confirm that the
existing board still has a connection, and if not, make one.

:cool:

miguelnoda 10th January 2012 08:42 AM

There are possibilities to do so and much will it cost is that I like before, if you want photos of the state control board, or if you could make the version.
a million thank Nelson Pass

Zen Mod 10th January 2012 09:52 AM

post pictures

Audiofanatic 10th January 2012 11:23 AM

Problem with amp
 
Hi Miguel, mr. Pass and others.

I offered Miguel to help him with his amp (via PM).

Miguel I know (more or less) what the problem is with your amp.
I want to help you with this amp and am willing to do this for free !
So if you come to Holland or send the pre to me, I'll fix it for you and send it back to you.
The pictures of your PCB shows that your PCB is not damage in such a way that it can not be fixed. I've done this before and I'm willing to help you.
Let me know if you are interested and want to accept my offer and consider it done!

Send me a Private mail or post your reply on the forum, both are OK with me.
Porfavor remite por e-mail privado o via el forum te ayudare gratis!

Atentamente,
Sincerely,

Josť

Audiofanatic ;)

mikojat 10th January 2012 12:14 PM

Hi Miguel, let's do it...

miguelnoda 10th January 2012 01:01 PM

Hello I send some photos like this on my pass labs PCB-1 X2
http://tinypic.com/r/aeu0rs/5
http://tinypic.com/r/auxpw0/5

Audiofanatic 10th January 2012 01:05 PM

Miguel
 
You are not that far away.
Spain is like in my backyard ;) it's still Europe.

Take your time.

Regards,

Josť

Audiofanatic :)


All times are GMT. The time now is 12:51 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2