pass labs x2-1

[miguelnoda]

these are the components that have welded the Q5 in the bottom of the X2

[Zen Mod]

leave them as is

gate stopper and protection zenner for excessive Ugs

[miguelnoda]

thanks so and will not let tensions finds when replacing components that have asked, I have no clear is the diode bridge
zener.

[Audiofanatic]

Hola Miguel,

Just leave it like ZM said they look original to me.
The only thing I would have done differently is put a (isolating) sleeve over the leads of the components but nevertheless it'll still work if you don't touch them.

I urge you to test the whole amp by using the schematic you send me and if everything is OK than you need to go deeper in to troubleshooting cause by replacing the (damaged) parts alone and not getting the amp to sound good you will be needing a helping hand from a friend who can fix it for you.

Again, it's not difficult to do this and with proper explanation you'll be able to fix it.

Now a question in Spain for you: Tienes el ruido o soplo en anbos vocinas o solamente en uno de los dos?

Do you hear the noise in both speakers or just one?

Gracias, Thanks,

Audiofanatic

[miguelnoda]

I want to clarify just what the bridge is the zener diode, because they put it,
and the zener and resistance in Q5 had told me to stop.
I imagine you've probably seen the pictures, if you do the shipping.
miguel

[Audiofanatic]

Hi Miguel,

Please mail me in Spanish, I don't understand what you mean.

Thanks,


Audiofanatic