NOStalgia - the all-FET JLH/PLH Class A amplifier - Page 3 - diyAudio
Go Back   Home > Forums > Amplifiers > Pass Labs

Pass Labs This forum is dedicated to Pass Labs discussion.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 20th August 2012, 05:54 PM   #21
knutn is offline knutn  Norway
diyAudio Member
 
Join Date: Mar 2006
Location: Oslo
Quote:
Originally Posted by gusto142 View Post
Hej Knut,

Can you inform us about the current status of this project?

Regards,
John
Time is a precious resource, I am afraid. However, I have had time to initial listening tests, which resulted in a change in layout of the power supply, because of a quite load hum coming from the speakers.

After the modification, I still have some hum, but it is not that annoying during listening. And yes, the initial listening is promising.

However I hate to have sounds from my amplifiers that should not be there, so I am also planning to modify the amplifier PCB.

I also have to inquire whether my unregulated CRC power supply is sufficient for this amplifier.
  Reply With Quote
Old 20th August 2012, 08:35 PM   #22
Dzius is offline Dzius  Poland
diyAudio Member
 
Dzius's Avatar
 
Join Date: Sep 2010
Location: Warsaw
You can use regulated power supply from Nelson Zen v5 I guess.
  Reply With Quote
Old 8th October 2012, 06:33 PM   #23
knutn is offline knutn  Norway
diyAudio Member
 
Join Date: Mar 2006
Location: Oslo
I have used the weekend to further RC-filter the negative supply. This has reduced the hum to nearly inaudible level. I have used a 1 ohm resistor and a 22mF capacitor. I assume a doubling of the capacitor will remove the hum completely.

I have considered the use of a capacitance multiplier instead of the RC-filter, but the result has convinced me to go on with the RC-filter, and the additional voltage drop is less than 2 volts (on the negative leg).

I also have had time to listening test, and I must say I am satisfied with the sound. And as for my other earlier class A amplifiers, there is more than enough power - loud and clean is it.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
All FET JLH Class A EUVL Solid State 18 30th September 2013 06:40 AM
JLH/PLH PC Boards? Winding Man Pass Labs 16 28th January 2012 02:11 PM
Line preamp for JLH/PLH? tmblack Pass Labs 12 1st November 2011 05:54 PM
J-JLH or PLH-J ? drjbf1 Pass Labs 11 28th July 2011 01:37 PM
JLH Class-A Amplifier Geoff Solid State 5 25th May 2001 11:55 PM


New To Site? Need Help?

All times are GMT. The time now is 06:57 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2