Aleph P 1.7 Volume Control Question

[toufu]

I just built the Aleph P 1.7 clone and it sounds really nice. I placed the volume control at the output side because that's what the original had. Why is it placed at the output side and not the input side as do most of the other preamps? Thanks.

-Jeff

 

[AudioSan]

I just built the Aleph P 1.7 clone and it sounds really nice. I placed the volume control at the output side because that's what the original had. Why is it placed at the output side and not the input side as do most of the other preamps? Thanks.

-Jeff

hello. that is because its natural destortion.

 

[generg]

Maybe it is the low input impedance........

So the source sees at least the 10k unbalanced......

 

[loovet]

with a microchip, it's like having a radio inside your pre-amp...

 

[6L6]

If you put the volume on the output (and you need to design for that from the beginning...) you get the distinct advantage of attenuating your noise floor down the softer you play your amp. At low levels, your background noise will be very, very low.

 

[toufu]

That makes sense.. thanks 6l6.