diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   Pass Labs X350 - Jumper Position (http://www.diyaudio.com/forums/pass-labs/200800-pass-labs-x350-jumper-position.html)

Rajkumar_ 19th November 2011 12:42 PM

Pass Labs X350 - Jumper Position
 
1 Attachment(s)
Recently I bought Pass Labs X350 & X0, I had noticed when I open top cover of the X350 jumpers not in position? When I compared to another X350 pictures from the internet, different position from my power amp. Any one clarifies which one is correct? What is the different between? Note: On the picture right side is my amp. Thanks in advance! Raj

hm4nine 19th November 2011 05:28 PM

If you remove all 4 jumpers the inputs are ac-coupled via 4 x 100u//0.047u.
On the left picture the amp is dc-coupled, on the right picture it is ac-coupled. The dc-position is printed on the board.

Cobra2 19th November 2011 05:48 PM

A little tread-jack: Can somebody please measure the DC-voltage (over supply-caps) on a 350 / 350.5 ?

Arne K


All times are GMT. The time now is 07:24 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2