Help with Aleph ONO PCB

pamaz · 20th October 2011, 08:12 AM

Hello all.
I'm trying to source a file I cannot get anymore in my PC.
Some 7-8 years ago I've built a Aleph ONO. This was done by using a couple of pcbs that were developed and published by a greek guy. The name on the PCB is written in greek and is something like "K. Bazakas 2002", with the last letter being a capital sigma letter.
That Ono PCB is missing the balanced output section.
And it works very well for my personal needs. Furthermore the construction was straightforward and not overly complicated.
Now I need to build another similar Phono pre for my second turntable (garrard 401 with 12 inchs sme arm . A classic one) .
Looking around in my drawers I've found just a paper picture of the main pcb.
So, I'm wondering if any of you, have in his pc the original PDF for this project, so that I'll be able to build my second unit.

If for any reason you don't want to publish here the pdf, my personal email is pamaz67@gmail.com
Thanks a lot to those who can help.

Paolo Mazza

nar · 20th October 2011, 08:27 AM

I have an AlephOno built on the same PCB. I had the files by email, although now i've lost the original files.

I don't have any PCB spares left

Original was built using a .pdf and etching at local shop.

Now in process of upgrading the original PSU ( to completely eliminate small hum issue ) to an UGS one, converted to 30V

Hope it helps.

Best,

nAr

Zen Mod · 20th October 2011, 09:32 AM

post a picture of that paper picture

it will help to search through my pile of files

nar · 20th October 2011, 09:41 AM

"K. Bazakas 2002" is engraved in copper on solder side

Best,

nAr

pamaz · 20th October 2011, 04:12 PM

sorry, I'm out till tomorrow.
I'll scan the picture and post it tomorrow.
thanks

paolo

Zen Mod · 20th October 2011, 04:41 PM

searched for Bazakas ;

nothing .

nar · 21st October 2011, 08:14 AM

Quote:

Originally Posted by Zen Mod

searched for Bazakas ;

nothing .

Actually I think it is that guy :

A5 - PROJECT 1

His AlephOno work is in the AOno section ... only small pic, text not ready yet, email is not attached ...

Hope this helps,

nAr

pamaz · 21st October 2011, 02:15 PM

Thanks a lot, NAR, this is a good starting point in my search......

nar · 21st October 2011, 02:30 PM

Quote:

Originally Posted by pamaz

Thanks a lot, NAR, this is a good starting point in my search......

You're welcome

nAr

pamaz · 25th October 2011, 07:46 AM

still no luck with this search.
anybody else can help me please?
paolo

20th October 2011, 08:12 AM	#1
pamaz diyAudio Member Join Date: Dec 2003 Location: Padova close to venice - italy	Help with Aleph ONO PCB Hello all. I'm trying to source a file I cannot get anymore in my PC. Some 7-8 years ago I've built a Aleph ONO. This was done by using a couple of pcbs that were developed and published by a greek guy. The name on the PCB is written in greek and is something like "K. Bazakas 2002", with the last letter being a capital sigma letter. That Ono PCB is missing the balanced output section. And it works very well for my personal needs. Furthermore the construction was straightforward and not overly complicated. Now I need to build another similar Phono pre for my second turntable (garrard 401 with 12 inchs sme arm . A classic one) . Looking around in my drawers I've found just a paper picture of the main pcb. So, I'm wondering if any of you, have in his pc the original PDF for this project, so that I'll be able to build my second unit. If for any reason you don't want to publish here the pdf, my personal email is pamaz67@gmail.com Thanks a lot to those who can help. Paolo Mazza

20th October 2011, 08:27 AM	#2
nar diyAudio Member Join Date: Apr 2002 Location: near the sea	I have an AlephOno built on the same PCB. I had the files by email, although now i've lost the original files. I don't have any PCB spares left Original was built using a .pdf and etching at local shop. Now in process of upgrading the original PSU ( to completely eliminate small hum issue ) to an UGS one, converted to 30V Hope it helps. Best, nAr __________________ "... Audio needs the thinnest wire ..." Rowan McCombe "Just 'cause they can't hear or sense it themselves doesn't mean you can't !" Allen Wright

20th October 2011, 09:32 AM	#3
Zen Mod diyAudio Member Join Date: Jan 2003 Location: ancient Batsch , behind Iron Curtain	post a picture of that paper picture it will help to search through my pile of files __________________ my Papa is smarter than your Nelson ! tnx to clean thread ; Cook Book ; PSM LS Cook Book ; Baby Diyaudio FORUM ; BAF Forum & Gallery;I'm dumb

20th October 2011, 09:41 AM	#4
nar diyAudio Member Join Date: Apr 2002 Location: near the sea	"K. Bazakas 2002" is engraved in copper on solder side Best, nAr __________________ "... Audio needs the thinnest wire ..." Rowan McCombe "Just 'cause they can't hear or sense it themselves doesn't mean you can't !" Allen Wright

20th October 2011, 04:41 PM	#6
Zen Mod diyAudio Member Join Date: Jan 2003 Location: ancient Batsch , behind Iron Curtain	searched for Bazakas ; nothing . __________________ my Papa is smarter than your Nelson ! tnx to clean thread ; Cook Book ; PSM LS Cook Book ; Baby Diyaudio FORUM ; BAF Forum & Gallery;I'm dumb


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th October 2011, 04:12 PM	#5
pamaz diyAudio Member Join Date: Dec 2003 Location: Padova close to venice - italy	sorry, I'm out till tomorrow. I'll scan the picture and post it tomorrow. thanks paolo

21st October 2011, 02:15 PM	#8
pamaz diyAudio Member Join Date: Dec 2003 Location: Padova close to venice - italy	Thanks a lot, NAR, this is a good starting point in my search......

25th October 2011, 07:46 AM	#10
pamaz diyAudio Member Join Date: Dec 2003 Location: Padova close to venice - italy	still no luck with this search. anybody else can help me please? paolo

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aleph Ono Project (from PCB group buy)	pquadrat	Pass Labs	166	15th March 2011 05:27 PM
My Aleph ONO/XONO PCB	veteran	Pass Labs	9	6th March 2008 08:14 PM
Coupling Caps in Aleph Ono/XOno and Aleph X0	rsbay	Pass Labs	12	23rd November 2006 08:05 PM
Aleph-Ono/X-Ono	mach.88	Pass Labs	8	10th April 2006 06:28 PM
Aleph ono PCB	toshiba	Pass Labs	2	1st May 2003 08:41 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read