BZLS from Belgrade

Djomil · 5th September 2003, 02:18 PM

Another picture. (sorry for my Tarzan english)

Raka · 8th September 2003, 07:58 AM

Are you kidding? Haven't you bought this piece of cake?

Tell us the truth, how much did it cost?

PMA · 8th September 2003, 08:06 AM

Nice rotary volume controls

. But use shielded cables, you'll get better cross-talk values at high frequencies ...

Raka · 8th September 2003, 08:15 AM

Nice comment, and I just recall some great idea I had some time ago. I know it's a bit off topic, but the simple way to make your own shield wire is to get the stranded shield from your favourite TV wire, wrap your 'wire wrapping wire made with silver', add some tubing and it's done.
Easy, eh?

Djomil · 8th September 2003, 09:10 AM

Thanks for comments. Here is some prices:
Case - 20 Euros
Rotary switches - 14 Euros
RCA connectors - 30 Euros
Transformer - 25 Euros
XLRs - 10 Euros
ELCOs - 15 Euros

Front panel is missing and it will be finnish in few next days. You can't see knobs for pots (they costs me about 35 Euros). Of course, pictures are comeing.

Djomil · 8th September 2003, 09:13 AM

One more picture (front view without front panel and knobs).

Djomil · 8th September 2003, 09:19 AM

PMA: Did you think for all wires?

PMA · 8th September 2003, 12:54 PM

Especially signal wires (inputs and outputs for left and right channel, poti wires as well). But shielding of supply wires does not hurt

joensd · 8th September 2003, 01:41 PM

Very nice job Djomil.
So much attention to detail.
Wish I had that patience.

Where did you get the rotary switch from?

14€ seems to be a good price.

Cheers
Jens

Djomil · 8th September 2003, 02:46 PM

JOENSD
4x6 poles and 4x11 poles I bought in local flee-market place in Begrade. Seller told me that they are from USA. 2x6 poles (for selector board) is from local electronic market.

8th September 2003, 07:58 AM	#2
Raka diyAudio Member Join Date: Aug 2002 Location: Close to Oistrakh	Are you kidding? Haven't you bought this piece of cake? Tell us the truth, how much did it cost? __________________ What is beyond the speaker?

8th September 2003, 08:15 AM	#4
Raka diyAudio Member Join Date: Aug 2002 Location: Close to Oistrakh	Nice comment, and I just recall some great idea I had some time ago. I know it's a bit off topic, but the simple way to make your own shield wire is to get the stranded shield from your favourite TV wire, wrap your 'wire wrapping wire made with silver', add some tubing and it's done. Easy, eh? __________________ What is beyond the speaker?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CC-CCS-X-BZLS: It's alive!	metalman	Pass Labs	130	27th October 2009 03:38 AM
Hello from Belgrade	congole	Introductions	9	7th February 2009 12:50 AM
BZLS pre-amp	garfieldcat	Pass Labs	4	4th July 2005 08:38 AM
How hot is your BZLS ?	till	Pass Labs	17	12th August 2003 10:34 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

8th September 2003, 08:06 AM	#3
PMA diyAudio Member Join Date: Apr 2002 Location: Prague, Kitakyushu, Fukuoka	Nice rotary volume controls . But use shielded cables, you'll get better cross-talk values at high frequencies ...

8th September 2003, 09:19 AM	#7
Djomil diyAudio Member Join Date: Aug 2003 Location: Belgrade	PMA: Did you think for all wires?

8th September 2003, 12:54 PM	#8
PMA diyAudio Member Join Date: Apr 2002 Location: Prague, Kitakyushu, Fukuoka	Especially signal wires (inputs and outputs for left and right channel, poti wires as well). But shielding of supply wires does not hurt

8th September 2003, 01:41 PM	#9
joensd diyAudio Member Join Date: Dec 2001 Location: Germany	Very nice job Djomil. So much attention to detail. Wish I had that patience. Where did you get the rotary switch from? 14€ seems to be a good price. Cheers Jens

8th September 2003, 02:46 PM	#10
Djomil diyAudio Member Join Date: Aug 2003 Location: Belgrade	JOENSD 4x6 poles and 4x11 poles I bought in local flee-market place in Begrade. Seller told me that they are from USA. 2x6 poles (for selector board) is from local electronic market.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)