Aleph Mini power supply

mike23 · 28th September 2011, 08:32 PM

i want to use t-network caps
in the psu for the aleph mini
based on the board from kk pcb how do
i keep either half seperate? won't they be
connected at 0 volt? making them into an

ordinary capacitor? any suggestions please

6L6 · 28th September 2011, 10:16 PM

More information on the parts you are using - do you have a manufacturer part number and/or link?

mike23 · 9th October 2011, 03:03 PM

changed my mind! going to use 6 x 22000uf 63v 105 degree
evox rifa peh169 instead. easier & it's the first project for me

digits · 9th October 2011, 05:25 PM

Totaly overkill, I promise you, first just build it with like two 10000uf ones you have lieing around. I think G rollins, the father of the mini, used 3300uf or something small like that.

Mine is currently 22000uf - 150 milliohm - 10000uf.

mike23 · 9th October 2011, 09:12 PM

ok mebbe just 4 lol. i'm using two 15V secondaries. do i need to use inrush limiting if so does the thermistor sit in parallel or series on the ac input

thanks again

mike

zyker · 9th October 2011, 10:04 PM

My test power supply board is equipped with 4 x 4700uF.
It just running well for the Mini-A.

28th September 2011, 08:32 PM	#1
mike23 diyAudio Member Join Date: Jan 2010	Aleph Mini power supply i want to use t-network caps in the psu for the aleph mini based on the board from kk pcb how do i keep either half seperate? won't they be connected at 0 volt? making them into an ordinary capacitor? any suggestions please

28th September 2011, 10:16 PM	#2
6L6 diyAudio Member Join Date: Oct 2010 Location: Denver, Colorado	More information on the parts you are using - do you have a manufacturer part number and/or link? __________________ Pass Labs Pearl Phono -- Pass B1 Preamp -- Pass F5 amplifier -- Pass Labs Pearl 2

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mini Aleph Power Supply	Jack Tupp	Pass Labs	21	11th January 2012 09:51 PM
Low cost compact power supply for sub-mini tube preamp	johnmac0117	Power Supplies	10	8th May 2011 09:48 PM
Using the same power supply for mini aleph and gainclone?	orpheus	Chip Amps	3	13th December 2005 08:29 PM
Mini A Power Supply	harry303	Pass Labs	4	31st December 2004 01:41 PM
Aleph X power supply	Mach_Y	Pass Labs	42	29th March 2004 08:43 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th October 2011, 03:03 PM	#3
mike23 diyAudio Member Join Date: Jan 2010	changed my mind! going to use 6 x 22000uf 63v 105 degree evox rifa peh169 instead. easier & it's the first project for me

9th October 2011, 05:25 PM	#4
digits diyAudio Member Join Date: Apr 2011	Totaly overkill, I promise you, first just build it with like two 10000uf ones you have lieing around. I think G rollins, the father of the mini, used 3300uf or something small like that. Mine is currently 22000uf - 150 milliohm - 10000uf.

9th October 2011, 09:12 PM	#5
mike23 diyAudio Member Join Date: Jan 2010	ok mebbe just 4 lol. i'm using two 15V secondaries. do i need to use inrush limiting if so does the thermistor sit in parallel or series on the ac input thanks again mike

9th October 2011, 10:04 PM	#6
zyker diyAudio Member Join Date: May 2011	My test power supply board is equipped with 4 x 4700uF. It just running well for the Mini-A.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)